mud bogger ...
I'm running a 1:9" twist 24.5" bbl'd .223rem ... and I love the 75g Amax in that rifle ... here's my load, for reference ...
moly coated 75g Amax, seated out to the lands ...
R-P brass (nickel, but normal brass would be same/same)
WSR primers
24.0g H335
this gives me a solid 2,950 fps, and a very stable bullet ...
Keep in mind, R-P brass has more case capacity than lots of other brass, and I'm running moly coated bullets ... so 24.0g of H335 might be more than most can safely run ...
but I'd suggest working up towards that basic load, or perhaps try working up with Reloader 15 ... I suggest that, because I don't get nearly as small an ES number as I'd like with H335, and am going to try RE-15 myself soon enough ...
as per usual, start low and work up slowly ... in that small a case, 0.3g increments is a good 'step' between loads while working up ...