|
Joined: Mar 2009
Posts: 225
Campfire Member
|
OP
Campfire Member
Joined: Mar 2009
Posts: 225 |
Has anybody systemically examined the accuracy of various powder + primer combinations, specifically for any of the following powders:
-RL19 -Viht N550 -H4350 -IMR4350 -RL15
In the Dec 2008 issue of Handloader Magazine, one of the authors featured states that different powders will have definite primer preferences. For example, the most accurate primer for Varget was CCI 250 primers (in a .308). He also suggested that when developing accuracy loads, one should start with first finding the best primer for the powder selected.
I am hoping to find the most accurate load for my .300 WSM using the above-listed powders to start of with. So my first step is to find best primer(s) for each powder.
|
|
|
|
Joined: Jan 2001
Posts: 9,100
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2001
Posts: 9,100 |
I have never seen primers effect the accuracy of a load used in a hunting rifle.
"The only thing necessary for the triumph of evil is for good men to do nothing." Edmund Burke 1795
"Give me liberty or give me death" Patrick Henry 1775
|
|
|
|
Joined: Jul 2004
Posts: 13,436
Campfire Outfitter
|
Campfire Outfitter
Joined: Jul 2004
Posts: 13,436 |
With the exception of the Viht powder, which I've never used, I've shot all of the others. And, they all shoot very well with Federal 210M primers. I've not had a need to try other primers as all of my rifles shoot well with Fed's. The only combination of powder and primers where Federal Primers did not perform was with H-4895 in a 223 and 222 Rem Magnum. Winchester primers were the best in those loadings, not Federal 205M's. Go straight to Federal 210, or 210M's and work from there.
Don Buckbee
JPFO NRA Benefactor Member NSSA Life Member
|
|
|
|
Joined: Jan 2002
Posts: 12,886 Likes: 5
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2002
Posts: 12,886 Likes: 5 |
Reloading for accuracy is hard enough when you only chase the real ghosts and goblins. Don't want to start chasing the imagined ones. JMO, Dutch.
Sic Semper Tyrannis
|
|
|
|
Joined: Sep 2008
Posts: 196
Campfire Member
|
Campfire Member
Joined: Sep 2008
Posts: 196 |
Bearclan, if you can get some, try the Magpro powder in your WSM. Currently am getting less than 1/2 in groups out of a BAR. Using CCI Magnum primers.
|
|
|
|
Joined: Feb 2006
Posts: 43,963 Likes: 24
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Feb 2006
Posts: 43,963 Likes: 24 |
Bearclan, my 300 WSM shoots almost identical groups using H4350 and CCI250's or Fed215's.
|
|
|
|
Joined: May 2005
Posts: 7,102 Likes: 4
Campfire Tracker
|
Campfire Tracker
Joined: May 2005
Posts: 7,102 Likes: 4 |
Has anybody systemically examined the accuracy of various powder + primer combinations, specifically for any of the following powders:
-RL19 -Viht N550 -H4350 -IMR4350 -RL15
In the Dec 2008 issue of Handloader Magazine, one of the authors featured states that different powders will have definite primer preferences. For example, the most accurate primer for Varget was CCI 250 primers (in a .308). He also suggested that when developing accuracy loads, one should start with first finding the best primer for the powder selected.
I am hoping to find the most accurate load for my .300 WSM using the above-listed powders to start of with. So my first step is to find best primer(s) for each powder. I looked at it many years ago, but to generate the most certain uniformity I could extract by eliminating rifle and shooter variance, I used a 30 pound open class bench rifle in .308. I found what bench rest shooters already knew, that primers both influence accuracy and sighting. JW
When truth is ignored, it does not change an untruth from remaining a lie.
|
|
|
|
Joined: Mar 2001
Posts: 18,881
Campfire Ranger
|
Campfire Ranger
Joined: Mar 2001
Posts: 18,881 |
I've tried different primers over the years. They rarely affect accuracy with a few exceptions. I've found that the mild primers, like the CCI's, sometimes don't consistantly ignite some ball powders. Federal and Winchesters do well with all types of powder, so I prefer them. I've found that in some cases, when loading at 70% or less loading density, magnum primers help. My .25-20 is like that, especially with ball powders. Reduced loads in rounds like the .280 and the 30'06 are like that. Primers are one of the last things I try changing when looking for accurate loads with the above exceptions. First are powder type and powder charges. Second is seating depth. E
|
|
|
|
642 members (12344mag, 10gaugemag, 06hunter59, 160user, 16gage, 12savage, 65 invisible),
2,871
guests, and
1,308
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,193,644
Posts18,512,377
Members74,010
|
Most Online11,491 Jul 7th, 2023
|
|
|
|