|
Joined: Sep 2010
Posts: 4,079
Campfire Tracker
|
OP
Campfire Tracker
Joined: Sep 2010
Posts: 4,079 |
I bought a Remington 700 ADL in 6mm Remington. It is an old one, but in excellent shape. It was not used very much. The top of the receiver has the cut-out for a stripper clip and holes in the side of the receiver for a peep sight. The bolt doesn't have the anti-bind cut in the lug like the current 700's. The stock has the pressed checkering, metal buttplate, and no swivel studs.
So now my question. Would I hurt the value of this rifle by putting swivel studs and a recoil pad?
|
|
|
|
Joined: Jun 2008
Posts: 1,246
Campfire Regular
|
Campfire Regular
Joined: Jun 2008
Posts: 1,246 |
Unless that rifle is unfired and in he factory box, it is just another Rem. 700 ADL. Do as you wish and enjoy the rifle.
NRA Life Patron Member Benefactor Level USN/USMC Vietnam Vet 1969-70
|
|
|
|
Joined: Apr 2004
Posts: 42,743
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Apr 2004
Posts: 42,743 |
Why not just get an aftermarket stock or a take off stock that already has that stuff done to it? that way you can save the stock you have in case you ever decided to part with it...you can return it to "As it was"... take off stocks are cheap...
|
|
|
|
Joined: Sep 2010
Posts: 4,079
Campfire Tracker
|
OP
Campfire Tracker
Joined: Sep 2010
Posts: 4,079 |
Unless that rifle is unfired and in he factory box, it is just another Rem. 700 ADL. Do as you wish and enjoy the rifle. It is not unfired and no box. Good point.
|
|
|
|
Joined: Sep 2010
Posts: 4,079
Campfire Tracker
|
OP
Campfire Tracker
Joined: Sep 2010
Posts: 4,079 |
Why not just get an aftermarket stock or a take off stock that already has that stuff done to it? that way you can save the stock you have in case you ever decided to part with it...you can return it to "As it was"... take off stocks are cheap... If I can find one in decent shape I may go that route.
|
|
|
|
Joined: Sep 2010
Posts: 41,340
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Sep 2010
Posts: 41,340 |
Nice grab! Leave it as is and shoot it! I wouldn't want it buggered up.
DMc
Make Gitmo Great Again!! Who gave the order to stop counting votes in the swing states on the night of November 3/4, 2020?
|
|
|
|
Joined: Jul 2014
Posts: 2,556
Campfire Regular
|
Campfire Regular
Joined: Jul 2014
Posts: 2,556 |
I have one that I put a fiber stock on. The gun has killed around 140 deer plus some antelope. Spiffy it up with a new stock and maybe a bedding job and enjoy it. The old ADLs are shooters. Mine shoots 1/2 minute with 100-grain Hornady Interlocks at 3000 fps.
You did not "seen" anything, you "saw" it. A "creek" has water in it, a "crick" is what you get in your neck. Liberals with guns are nothing but hypocrites.
|
|
|
|
Joined: Dec 2004
Posts: 291
Campfire Member
|
Campfire Member
Joined: Dec 2004
Posts: 291 |
The value of that rifle is as a shooter. Adding the accessories will help. rifles from that era were some fine shooting rifle. I believe the barrels and receiver fit were much better back then.
|
|
|
|
Joined: Sep 2010
Posts: 4,079
Campfire Tracker
|
OP
Campfire Tracker
Joined: Sep 2010
Posts: 4,079 |
Ok, we have 3 for doing modifications and 2 against. I am leaning toward modifications. How do you feel about recoil pads? I am looking at the Pachymar Decelerator D750B or D752B. Any opinions on either?
|
|
|
|
Joined: Dec 2002
Posts: 25,858
Campfire Ranger
|
Campfire Ranger
Joined: Dec 2002
Posts: 25,858 |
On a 6mm, a recoil pad serves mostly as an aid to keep the rifle from slipping when leaned against a wall, or as a stock extension if LOP is too short.
When I add a Pachmeyer Decelerator to a stock, I usually have to remove 3/4 inch of wood from the stock. I installed a decelerator on my Ruger #1 in7mm STW and also on my Win 70 in 264, but I do not know what the model #'s are.
If the rifle were mine, I would probably skip the pad as being more trouble than it is worth in a light recoiling rifle. But if the stock is too short for comfortable shooting, then by all means add a pad.
People who choose to brew up their own storms bitch loudest about the rain.
|
|
|
|
Joined: Apr 2007
Posts: 3,362
Campfire Tracker
|
Campfire Tracker
Joined: Apr 2007
Posts: 3,362 |
Bought bottom metal and slipped my wife's ADL shortened from when she was a girl into a BDL stock. Still shoots even with factory pressure point, with her daddy's handloads.
|
|
|
|
Joined: Sep 2010
Posts: 4,079
Campfire Tracker
|
OP
Campfire Tracker
Joined: Sep 2010
Posts: 4,079 |
On a 6mm, a recoil pad serves mostly as an aid to keep the rifle from slipping when leaned against a wall, or as a stock extension if LOP is too short.
When I add a Pachmeyer Decelerator to a stock, I usually have to remove 3/4 inch of wood from the stock. I installed a decelerator on my Ruger #1 in7mm STW and also on my Win 70 in 264, but I do not know what the model #'s are.
If the rifle were mine, I would probably skip the pad as being more trouble than it is worth in a light recoiling rifle. But if the stock is too short for comfortable shooting, then by all means add a pad. The length of pull is fine. I don't find it enjoyable to shoot anything but a rimfire with a buttplate. Metal against flesh and bone is not fun for me.
|
|
|
|
Joined: Sep 2010
Posts: 4,079
Campfire Tracker
|
OP
Campfire Tracker
Joined: Sep 2010
Posts: 4,079 |
Bought bottom metal and slipped my wife's ADL shortened from when she was a girl into a BDL stock. Still shoots even with factory pressure point, with her daddy's handloads. I thought about the BDL route, but the bottom metal looks like it would be between $75-$100. Although I'll probably have that much in it with modifications.
|
|
|
|
294 members (222ND, 160user, 10Glocks, 10ring1, 12344mag, 1eyedmule, 24 invisible),
1,820
guests, and
1,091
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,191,391
Posts18,469,828
Members73,931
|
Most Online11,491 Jul 7th, 2023
|
|
|
|