Im looking for some 140 grn loads for the 280 using the rem.accutips.or hornaday 140 sst loads Thanks.

I believe my 140 grain Accubond load in my 280 utilizes 57 grains of Re 19.

That load worked in my Ruger M77 .280

Thanks guys , Dingo i see u are uaing magnum primers...I was going to use cci br2 primers with my 280.

I used IMR-4350 with Hornady 139 BTSP for 2888 fps out of a Remmie 7600. It lays the smack down on deer, brother Park.

Are you using Magnum primmers????? Brother....

Non-magnum primers for me -- 56 or 57 grains IMR 4350 and 139-grain Hornady. RL-19 a bit faster but not more accurate.

Being leary of the 'safty police' informants....here I go.

I worked up a load with 139 sst bullets a few years back that consisted of fed 210M match primers, win nickle cases and here is the big one.... an OVER book max charge of 57 gr. of IMR4350. Bullets seated to middle of cannilure. It chrono'd out at an even 3 grand from a 22 inch barrel.

I managed to survive and did not destroy my pet.280 with carefully working up to such a horrible, terrible, taboo amount of above book usage of powder.

It was accurate, fast and devastating load for whitetails and coyotes.

Thats funny ...Thanks.I gotta breakdown and buy me a chrono...

You could possibly get away without using a magnum primer in my load. I doudt it would make much difference.

I've used Magpro for good accuracy. I haven't run it over the chrony... but a big mulie didn't ask what the velo was either at 350 earlier this year.

IMR4350 54.0 grs behind a 140 gr. Partition or Accubond for 2940 fps in a 22" barreled Model 700. Federal 210 primer.

Used some H4831SC with Federal 215 Magnum primers also and was just playing with it a bit. Looked to have some real promise.

Work up to 57 grs of superformance with 140`s. Unbelievable tiny groups and getting over 3000 FPS.

59 grains of R-22 and a 139 hornady is the load I shoot in my 280.

My last 280 liked 60 RL22, Fed 215 and 140 Partition or Bitterroot for about 3050 from a 23" Shilen barrel.