Cast these awhile ago. So sorry they aren't 9MM. I am ashamed beyond descriptional description. I am sorry I truly am. Please forgive me. These are lowly 44 caliber 270 grain bullets. Again so sorry.

You just cannot be forgiven for this...

So they're basically a BIG 9MM?

I saw 270 in there somewhere...

And here I thought you were having a bonafide moment of contrition.

I did have to smile at that one.

Nothing to be sorry about . They look just like mine that I cast.

Yes, you are a sorry individual.

You know you're not supposed to eat those....right?
Supposedly they can make you dumb, not that that would apply to you.
I doubt you could be made any dumber.

Get the lead out , , ,

wheres the salsa?

I have been thinking about casting bullets myself, trying to decide if its worth the investment to buy the equipment.

Man, I wish I had gone to your house for Halloween....
My S&W 624 would eat those up!

Hey, 270 for a .44? Wimp for a S&W. Then a Keith SW that needs 30 BHN to shoot without a shoulder wipe.
I am losing faith in you. You need a bullet. How about my 330 gr at 200 yards.

Did you cast those, just to regain some semblance of relevance? Or, perhaps....”seen the light”! In any case.....welcome to the “real world”! memtb

Yes and even designed the bullet and made the mold. I cut the SBH forcing cone to 11 degrees and made the bullet ogive as close to 11 degrees I could. Came out a little heavy from projected weight of 320 gr. Cutting a cherry on the lathe is hit and miss for weight. A miss of 10 gr is nothing. I do not make molds to sell but will send a few bullets to have a mold made. if any change is made to my designs they will not work.

My “little dig” was meant for “glockdoofus”! I vet posted immediately after you!

Though, I’m somewhat.....OK very envious, of those that can use a lathe or milling machine. My brother is very good, I have trouble walking and chewing gum....simultaneously, together, at the same time! memtb

Homo with less than a half inch?

.27 inch?

Glockdoofus is a funny man and brings humor that makes me laugh. You did not fool with me when I worked. If you left your lunch bucket on the seat, I would screw it to the bench. I could open any lock and if you were on vacation I would fill your locker with crumpled up papers or a paper Mache doll with a deer tail crotch as ugly as sin. If you did not have the big one, I failed. I was so bad in the army I had to booby trap my bunk since I short sheeted so many beds and removed half the springs so they broke. My life was laughter and friends and never had an enemy or met a bad person until on the net where I was taken advantage of. Nothing is worth the the loss of a friend for profit or fame. I made the first lighted bow sights, stolen, and the way to tune a compound to any broad head in 5 minutes, stolen. So far nobody has matched my bullets since they screw them up. But all is free if you ask.
Even a deer I shot. Do not steal it at gun point, just ask and I will give it to you.
Every site has a king of the hill that has taken info from others. Gun writers today do not how to poop and the few rags I get only advertise what a man can't afford. $8000 binoculars when my $10 ones show the same. Your rifle will not shoot with a glass less then $4000 on it when a Weaver K10 can match it. Snipers used Unertel scopes that failed since the were not purged so cross wires rusted. I still have replacement wires on hand. Held by screws.

G'Doof is BFR's alter ego.

And some pretty large lube groves.

GD is far more sarcastic than BFR.

Never know but if you mess with me you will die from laughter. I admit to be more crazy. I have lost the edge with age but glockdoofus candle has burned out because nobody is a bigger nut case then me.

It's all good, I don't take the internet too seriously.

After that last post of his I would tend to agree with you.

Doofus,

You should design a 270gr 9mm bullet. Of course it would need to be a Keith profile, and as mentioned above no less than 30 BHN.

That should take the 9mm to a whole new level of greatness. Heck if people started shooting it in PCC it might make all rifle calibers obsolete.

That was my first thought.

What kind of a childish prick spends his time trying to annoy a bunch of complete strangers?

He be a prickly prick of the most prickly of the prickliest. But it is all soothed by the belief in the 9MM. Even the most pricked of the pricked has the soothing soothness of the most high positioned in the position of the most revered of all, the 9MM Force Field of great protection.
I carry a 9MM cartridge in my pocket so the force of forceness will be with me and it protects me from troubling troubles from the visitudes of the visitudials of life.
May THE FORCE be with us all.

It is fun. My goal is to make everyone the best shot and the best bullet caster. I want nothing in return. But when I am used and taken advantage of for profit, I still do not need money. It is evil so if you want a bullet design it is free and just name it Jim's bullet. My home is always open for all.
I will spend a week or more to make you a gun part that is never to be found, like a link I made for an old Winchester lever gun. I feel good to help and it is my pride. Only if I have to buy something or pay postage do I need that back. You can sit and watch me fix your gun free. If I make you laugh so much the better.
I have been used and abused and a few are here but I do not hate them. They hate because I proved them wrong. My mistake so I have tempered what I say but to lose any friend from becoming so top heavy only God is better sure hurts.
Say what moves you but if we were face to face you will see I never met any person I do not like.

Let me take it farther. We do not owe a dime and have more money in the bank then we could spend. So what do I need? I only want all of you as friends so as you mock me you do not harm me at all by hiding behind a keyboard.

Dude, you need to take some of that money you have in the bank and go see a shrink.

Hmmmmmm....

Anyone think Glockdumbazz and this cat BFR might be the same person.


.

I’m not offended in the least. It’s even mildly humorous. But it’s gets to be a little bit like the slightly retarded kid who just doesn’t know when it goes from mildly humorous to somewhat annoying.

Dang man... I have a S&W 624, 4 inch .44 Spl, that would love to digest some of those 270s....

I said that a year or so back, most days I think I was wrong. Then there is today...

I like the looks of those .44's in the OP though, well done, GD. They'd be better if they were 264 or 284 gr though.

I’ll forgive you for saying, “descriptional description “