Howdy Gents

I finally picked up my Varmint model. Which rf rings are folks using?? Plan on mounting a 4-12x40AO 3200.

Many thanks

Talley rimfire rings.

Warne all steel...they have a Medium and a High... It will depend how big your ocular bell is for bolt clearance....

Bob

i have always used millets on the the 452 actions

BKL 257's are very popular......They have worked well for me.

Leupold

K, that's funny. 5 responses and no two the same.

Yup, we're a big help!

A 6th different response; I use Burris Signature Mediums with a Leupold VXII 4-12x40AO on my 455 and they work great. Can't imagine a 452 would be any different.

A nice wood stock CZ-452 and the Leupold rings go hand in hand.

But sadly in missing the nice wood stock, all I've got it the birch (?) trainer. Whatever it is made of isn't walnut.

I owned a nice CZ-452 American in 22 WMR a few years back. I bought some BKL's. Nice quality, rugged design, aluminum alloy of some sort. I have the Leupold rimfire rings on my Sako Quad, they are steel and look more traditional. Given the minimal price difference between the two, I would choose the Leupold based on aesthetics. You can't go wrong with either though.

Burris Deluxe Mediums (Leupold 3-9x40)

CZ 452 Trainer w/ S&K's holding Kahles 4x. Scope was only one in cabinet short enough to fit behind iron rear sight. A Leupold 3x would be nice. As for the birch, I think it's attractive.

Cal, on that setup with the 3-9X40 on the CZ, can you take a measurement for me? How high does that scope have to be for the objective to clear the barrel and the bolt the ocular? 0.35" or so?

Could you measure from the top of the front receiver bridge to the bottom of the scope tube? I would appreciate it.

J&P Custom 11mm to Weaver Delrin rail adapter... https://www.jnpgunsprings.com/index.php?cPath=10 with Burris medium Signature Zee's... The Delrin is pretty slick & I'd read that some guys were having problems with them slipping until they torqued them down good, so I took a little sandpaper to them & then smeared some permatex "form a gasket" on em...good to go.

I'll second the BKL rings as good stuff.

Here's my CZ 455 with a Leupold 4-12x40AO mounted in Burris Signature Mediums.

Rick,

Didn't catch this yesterday, but I'll try and dig it out this evening and see what I can come up with for you.

Some of you folks got some nice lumber on your CZ's, Mine is a bit on the plain side (but that isn't why I bought it.)

I like the Burris signatures they come with two clamps now.

Burris Signature or BKL

Leupold or Burris are nice. I use the Leupold Ringmounts.

Watch out!!! Some of the rings mentioned may not fit as they are for the 3/8ths inch scope grooves which are standard here in the U.S.. The CZ American has the 3/8ths scope grooves BUT the CZ Varmint, Trainer, Special and Scout all use the 11mm Euro grooves so make sure you get the right rings.

I tried the all steel Warne's and the Millets, settled on the inexpensive B-Square .22 sport utility rings, just liked them better. I think You might need the mediums for a 40mm Scope, this scope is a 28mm and the rings on the gun are the lows;


Jerry[u][/u]

I went with Talley's on my CZ 452 American. Excuse the backwars Montana Sling. This picture was taken before I was "educated".


ddj

They have worked well for me also.