Home
This is Josh Clarke's "Outfitters Axe". It was designed as the big brother to his popular Rifleman"s belt Axe .
The idea for these started last Fall when one of his customers who is a registered Guide asked if he could make a larger version of the Belt axe for saddle use.

This axe is one of a handful that Josh has made with a hand ground octagonal hammer poll. The standard shape is round. Less than 10 of these were made. This one also has some nice curl throughout the handle- unusual in Hickory. This is the only one I have for sale.

The Axe is 34 oz and is 18 inches long. The head is an Iroquois style with a fully hardened flat hammer poll . The Axe head is about 6 oz heavier than the Belt axes . The bit has aggressively flared cheeks for full splitting capabilities. The neutrally balanced head along with the straight handle provides a lot of blade speed and striking accuracy. Testing has proven these to be wicked little choppers and splitters, as good of a 2lb axe as you can buy.

Made from US made Vaughan Axe forgings ,the head is reshaped and the edge is hand ground ,and given a razor sharp 25 degree inclusive cutting bevel. The performance rivals anything coming out of Sweden these days and I believe these heads are actually a bit tougher and less prone to chipping.

The Handle is hand shaped, sanded and torched .Then it's given six coats of pure Tung oil .The resulting finish is smooth but still grippy. The Axe comes with one of Josh's hand sewn Vegetable tanned leather masks .

The Axe with Leather Mask is $139 plus $15 shipping.

PayPal or USPS MO as payment.

Axe-

[Linked Image from i.imgur.com]

[Linked Image from i.imgur.com]


Polished and hardened Octagonal poll-

[Linked Image from i.imgur.com]


Leather edge mask
[Linked Image from i.imgur.com]

Standard Outfitter (on right) vs Belt axe-
[Linked Image from i.imgur.com]
I'll take it. Throat protector available? PM me your mailing address. USPS on the way in the next few days.

Thanks,

MS
Originally Posted by Lockhart
I'll take it. Throat protector available? PM me your mailing address. USPS on the way in the next few days.

Thanks,

MS


OK I will set it back for you. Will send a PM in a bit.
I’d like one like that with octagonal or round poll, and a handle similar to that if/when available.


These lil axes are awesome. I have one of each and a couple of Josh’s tomahawks, and a boot knife. Nice work
I would also like one please.
I would take one
I would like one too if more become available.
© 24hourcampfire