Athlon Argos HMR - 07/30/21
I got the Remington 788 lined out as far as ejection goes (so far). I took the Burris E1 4.5-14x42 off my dads 7 mag and threw it on there just to shoot the rifle and see what turret caps I could clear. I have been looking at the Argos HMR after a few recommendations on another post (about the meopta optika 5). I am undecided on a 2-12 or 4-20, but I had a quick question...
Can anyone tell me the measurement from the center of the elevation turret to the outside of the capped windage turret (on either magnification model)? The reason I ask, is the 788 ejection clips the edge of the windage turret cap on the E1 and judging by the pictures only, the HMR is pretty similar so I think it should clear or be the same.
Any information is much appreciated and thanks to everyone who gave input on the ejection issue!
Can anyone tell me the measurement from the center of the elevation turret to the outside of the capped windage turret (on either magnification model)? The reason I ask, is the 788 ejection clips the edge of the windage turret cap on the E1 and judging by the pictures only, the HMR is pretty similar so I think it should clear or be the same.
Any information is much appreciated and thanks to everyone who gave input on the ejection issue!