I just bought a Burris Drop Tine 4.5x14 x 42mm AO and the Obj Bell looks "huge". Spec's claim it is 2.2" wide. I want to use Medium HT Leupold STD rings ( well, this one will be the Extended Front ring for a Mod 7) because I have them on all my rifles except a few. Specs also claim that Leopold's Med rings work for 42-(maybe 45mm) . But this baby looks huge as I said. My rifle is still at the smith's but wondering if this 2.2" Bell will work with Med rings? Help anyone?

Toss the scope,base and rings,while you can. Hint...............

Oh you scamp, ha. I can honestly say I have never had an issue with the mounts. I "did" have a Burris 3x9 lose its reticle (first shot from my first 338WM, back in early 90s) Replaced it with a Leupold 2.5x8, no issues. The newer Burris scopes work fine on what I have put them on, up to 338WM also. But this one is going on a 243, and I already have the mounts/scope. Its just this OBell looks like the old Simmons 44! ha

Toss the scope,base and rings,while you can. Hint.

You were/are the one asking questions,for very good reasons and would do well to forget everything you "think" you "know". Hint..............

Stick, I know your not a fan of the op's scope or mounts. I'm replacing a scope with a Athlon Helos BTR GEN2 2-12x42 what rings do you use or recommend?

What are the particulars of the platform and it's application? Hint.

The OP doesn't want to know what works or why,but rather a hug for her fhuqking STUPIDITY Award and them differences are beyond "stark". Hint............

I mounted that same scope on a 700 using medium rings.

Stick, The Athlon Helos is going on a Tikka T3x 308 with a 20 moa mountain tactical rail.

KchuntShoot is yet another Professional Victim,who Dreams aloud and is unable to cite particulars. Only because she's doing her BEST though. Hint.

Onto a Teeker wearing MT 1913 inclination,I want SWFA Low's. Mainly because they are in fact fhuqking Low and combine great surface area,with very modest mass,while enhancing ring spacing along with said attributes. Hint.




Just sayin'................

Get a one piece rail/mount, either weaver style or picatinny. Best picatinny rail I've found is by Hanks precision gun parts. And use burris signature zee rings, med. should be fine. Don't even screw with standard rings and mount(s).

It constantly amazes me that you imagine I give any fuucks at all what you think. I wrote you off as utterly broken years ago. Just like so many others have. All your ranting and name-calling is......


a hint.

Hint.

KchuntShoot,

I REALLY "believe" you,as you feverishly read my EVERY word,gawk EVERY Splendid Pixel and quantify in the throes of same,how Imitation is THE most Sincere form of Flattery...you "lucky" kchunt. Hint. Congratulations?!?



You Professional Victims are a "rugged" lot. Hint.

Bless your poor poor(literally) heart and for quantifying how being you,is so troubling for you.

Hint.

Fhuqking LAUGHING!...............

You didn't even answer the question of the OP.

HINT.

Still giving no fuucks, little man.

KchuntShoot,

I REALLY "believe" you,as you feverishly read my EVERY word,gawk EVERY Splendid Pixel and quantify in the throes of same,how Imitation is THE most Sincere form of Flattery...you "lucky" kchunt. Hint. Congratulations?!?



Pardon my not being compelled to condone STUPIDITY,though same is the best you can muster. You Professional Victims are a "rugged" lot. Hint.

Bless your poor poor(literally) heart and for quantifying how being you,is so troubling for you.

Hint.

Fhuqking LAUGHING!...............

I haven't scoped a new rifle in a while, and I've got a Tikka 695 and Win 70 that need some help. 30MM scopes are going on them both, and didn't really want/need to put 1913s on them, looking for steel. Suggestions?

I don't 695. Hint.

On a Winny,I'd look for Burris Signature Extreme 2pc 1913's,or grab 2pc Steel Weaver Warne's and open them up to a 1913 cross slot,for SWFA Low's already mentioned above. Hint.






Just sayin'.............

If ever I want to know what black dicks taste like, I'll seek you out, little guy. Then your experience will hold some value for me.

KchuntShoot,

I REALLY "believe" you,as you feverishly read my EVERY word,gawk EVERY Splendid Pixel and quantify in the throes of same,how Imitation is THE most Sincere form of Flattery...you "lucky" kchunt. Hint. Congratulations?!?

Fortunately for you,Imagination and Pretend are free,so even YOU can "afford" to "contribute",even thoug the only things you can "offer" in the first hand,which are your seemingly WELL founded Homoerotic Fantasies. Hint.



You Professional Victims are a "rugged" lot. Hint.

Bless your poor poor(literally) heart and for quantifying how being you,is so troubling for you.

Hint.

Fhuqking LAUGHING!...............

Thanks Pard, that helps! Stick, I know you have some fine rifles and scope set-ups, but I don't have the budget you do, ha. Now, if you wanted to "give me" one of your set-ups, I can send you my Dealer's Address? ha

2.2” = 55.8 mm. That’s a very large objective lens so will need ring height to fit a 56 mm objective. Doesn’t sound like the Leupold mediums (42 mm max) will do it.

Buying SCHIT glass,is false "economy" and same goes SCHIT mounting systems. Start with SCHIT and you will fhuqking always end with SCHIT. Hint.

Were your VERY Tender Feelers not involved,you could have basked in the long term sanctity of wares,that actually fhuqking work...start to finish and been into same for under 350 Clams turn-key,with glass,mount,rings and caps. Then you could have learned that which dictates POA/POI intersections,as per fhuqking whim. Hint.



Just sayin'.............

I understand your point, however, I don't like rails, and I don't like tall turrets. Thanks for the info guys.

JamesQueen,

You "understand" less than zero,thus your propensity to assemble Schit Rifles,while doing your BEST. Hint.

Fhuqking LAUGHING!..............

The objective end is huge because it has an AO. The lens is actually just 42mm but the objective is the size of 50mm because of the AO.

Thanks MagShooter. Watch out for Ol Stick...he is in rare form! lol