Krylon paint off of cerakote

What chemical would you use to remove krylon spray paint off of a cerakote surface??

Recent purchase AR15 Upper with a little green spray paint on the Factory FDE finish. Might as well remove it

Citrus strip safe on cerakote?

Thanks guys

It should pose no problems to the finish.

Acetone and brake cleaner have both worked for me. Rub a dub dub.

Lacquer thinner

Originally Posted by tedthorn

Lacquer thinner

That's what I would use. Wear gloves and do it outdoors.

Okay. Have all the above at home. Will get to work this week on it.

Thank you guys. Just didn’t know what all would be safe for cerakote finish

Citri-strip

Why don't you ask a Cerakote applicator?

I don't think Citri-Strip will hurt the CreaKote...but I would certainly test a small area before going full hog!

Shouldn't be hard at all to remove .
Citri strip like you mentioned
Ceracoat PROPERLY applied is really resitant to gun cleaning solvents to include montana extreme extreme copper killer. JME.

test a small area 1st like others have mentioned

Cerakote is a ceramic based material. Citristrip for the win.

Thanks again gentlemen. Appreciate the guidance.

Originally Posted by NVhntr

Originally Posted by tedthorn

Lacquer thinner

That's what I would use. Wear gloves and do it outdoors.

...and with the wind at your back. That stuff can fry your brain in a hurry. It sure works, though.

Originally Posted by Rock Chuck

Originally Posted by NVhntr

Originally Posted by tedthorn

Lacquer thinner

That's what I would use. Wear gloves and do it outdoors.

...and with the wind at your back. That stuff can fry your brain in a hurry. It sure works, though.

We buy 110 gallons a year

It's great for a ton of stuff in our shop