Looking for some first hand experience. It's hard to not be interested for the price. Mainly concerned with reliability over the long haul. Anyone have or know someone in the 2k/3k round count? Also looking at the G3 TORO for mounting a red dot in particular. But I would like opinions on both models. Thanks.
I can't speak on round count. I had a g2c & put 200 rds through it without a hitch. It shot well & accurately. The blade trigger was a little funky, not the best, but usable. For the price it can't be beat & I'd wager it's better than some higher priced models. Still not sure why I traded it, I'm a bonehead.
Oddly enough, those are the only Taurus guns that do NOT get a lot of bitchin' about. Everything else they make gets some bad reviews, but I never see any complaints about those,
@jiveturkey. I spoke to 2 different people today that echoed just what you said. 2-300 rounds without a hitch. Happy Birthday
@montana marine. I actully scrolled past that one this morning. I'll check it out.
@ratsmacker. That definetly seems to be the case.
General internet consensus is that the first 300 goes pretty well. It would seem to me that most issues would arise in that amount of time. With most any weapon, I believe. I think they may be worth a shot.
I did look at a g2 and a g3 at the LGS today. I like the wider safety blade that is on the trigger of the g3. Personal preference. Thanks guys.
I have a G2 or 3 still in the box in the top of my safe that I bought from a co-worker a couple of years ago. I forgot I had it until the other day, may drag it out and shoot it just to see, or give it to my daughter.
I have a G2 or 3 still in the box in the top of my safe that I bought from a co-worker a couple of years ago. I forgot I had it until the other day, may drag it out and shoot it just to see, or give it to my daughter.
Due to the price of ammo, I"ve only got 500 rounds through a combination of Taurus G2c's and G3c's Just to be clear the first model out was the PT111. I picked one up early one and gave it to a friend of mine that has been using it since. The G2c came out with a few "improvements" that were asked for from different Brazillian agencies. They have been extremely reliable, IME. I've made them available to several people and only had one guy complain. He was limp wristing it, and having all kinds of issues. Too many issues to be either the ammo or the gun. We talked about it and I offered to go out with him. After I explained how to hold it (some one else had told him way wrong) he hasn't had any more problems. I had one on a table at a gun show a couple of months ago and every guy who walked buy and noticed it, talked them up and couldn't believe how good a gun they are. The G3c came out next. The c denotes they are compacts. They also have a G3 full size out with both 15 and 17 round mags, depending on the models. I'm sitting here typing with my G3c on my belt. It's there from the time my pants go on in the morning till I go to bed. My FFL guy has gone to carrying the Taurus's and he's a big seller of them. I'm would assume just like with any other manufacturer, there's probably been one or two that have gotten out that had an issue, but what manufacturer hasn't. The last video I saw from Honest Outlaw he indicated that testing these models (testing for him is 1000 rounds) and all three have performed flawlessly. I haven't seen the one MM posted so between me and my FFL and several friends we've been totally happy with our guns. Talking to dealer friends, they say they are one of the top sellers coming through and have had no issues. Sorry I haven't put the number of rounds through them, that would satisfy you. I think it's important to have plenty of ammo on hand just in case. From my experience I would depend on mine with out issues. Point of fact I do. I have made some road trips and counting on them. I holster mine in a Simply Rugged holster that works very well for me. I carry OWB 3:00 carry. No indication I've ever been made.
I forgot to mention the G3 TORO. It's actually the G3c TORO, it's a compact. I had one for a short time, shot just fine. As you know it's got a cut out that you unscrew for a red dot of some sort. Hey, I'm 71 years old and not big on change. I don't see me adding a red dot and trying to learn that whole thing. So I moved it along to someone who wanted to do that. Am I sorry, Not yet, who knows what's later. I didn't play with it enough to give you an educated judgement on it. Sorry.
From what I've seen you can pick up a G2c for around the $250 mark and the G3c for under $300, about the same as the G3. The TORO was a little more as I recall. Not like you are taking a big risk. If you don't like it, sell it to someone. Or better yet, give it to someone, that could use a gun. Take them out and show them how to use it.
I worked the gun department of a local store and they were our best sellers. I believe we had two come back in 3.5 years and one was for damage caused by the owner. A local indoor range rented them and those guns easily hit a couple thousand rounds each year.
I was impressed enough I bought a GX4 to become my "small" carry gun. I have only 643 rounds through it so far but I haven't had a bobble with it yet. My only complaint is it shot under a 10" paper plate at 7 yards using a center hold and 115 gr bullets. 147 gr bullets brought the impact point up between the bottom edge and the center of the plate.
Appriciate everyones help. We're going to look at the G3C later this morning. I think I've come to the conclusion that based on the vast majority of the reviews I have seen being positive and the initial cost being so minimal, its worth a try. I've wasted way more than $250 on way worse things. Fro sure. Thanks again.
Brought home a G3C this morning. I think it’s going to be okay. Trigger seems to be noticeably better than the G2 when dry firing. Bought some 115 grain Winchester to send through it to see how it goes. I’ll try to keep up with some updates in this thread for anyone who may be interested. Appreciate the input and links. Big help from the Fire. Thanks again.
Put 50 rounds through it yesterday without a hitch. Performed very. My wife and I both shot it with no issues. I was curious if she would have issues with limp wristing. The only issue she had was bumping the safety during recoil and moving it to the safe position inadvertantly. No fault of the pistol. Thats something that we both knew we would have to deal with and overcome. I think it happened twice for her in the first 10 rounds and she was zble to remedy that from that point on. So far, so good. Thanks go everyone for the help.
I’ve put several hundred rounds through the GC3 I bought from mjbgalt here and I like it a lot. The trigger on the 3 is a lot better than the 2 but I like the Glock better.
I have a Glock 26 as well and I like it a lot with an extended mag.
The GC3 has the same feel as the G26 w/ an extended mag but the texture is way better.
The GC3 has a safety which sucks.
A PSA Dagger is similarly priced but doesn’t have the safety and has other advantages of Glocks. If I were you I’d look hard at those; they’re similarly priced.
I've heard mixed reviews on the Dagger 9. I try not to judge a gun on price alone. Prefer to hear from people who actually already own one. I've talked to a pile of people with the Taurus, and not a single negative. They all have liked them, and said they go bang every time. If you go from a metal gun with a firing pin, to a striker fired gun, they are always going to feel differently. Doesn't mean you can't get used to the feel of the trigger or grip/whatever, but the bottom line is they have to go bang every time. So far the G series Taurus seem to perform. Even Hickock was very positive on the GX4. Sounded like he was planning on buying that one.