Can anyone tell me where I can find case drawings/dimensions for these cartridge families. Have a couple of projects in mind, need to see what will fit in actions I have laying around gathering dust. Have not shopped manuals yet, what I have on hand not current enough. Thanx
KDK
Chuckbuster, Steve's Pages has some of them. Here's a
link.
http://stevespages.com/page8d.htm I found 300 & 7mm
SAUM and 270 & 300 WSM there so that's a start for ya. He
sure has a lot of information on his pages... Bruce
Try
www.shortmagnums.com you'll think you died and gone to heaven.
Thanx guys, will check them both out. I have a Rem 722 action that was originally .257 Roberts. Someone re-chambered to .257 Rbts/AI, magazine is not long enough to make use of the case capacity. I LIKE!!! to be different am thinking a 6.5 on one of the "short magnum" cases. I know there is really no reason to go 6.5 over .257 or .270 except the above stated DIFFERENT factor. I also have a SAKO M591 LH action that has same magaxine length so it will likely get same chambering. I shoot Lefty and the SAKO I picked up extra cheap when gun dealer friend got it in by mistake. The 722 I have a KILLER piece of wood to fit it to, figure will make dandy Deer/Antelope/Caribou rifle for my lovely bride.
can't get
www.shortmagnums.com to come up?? Is that url correct?
Thanx
KDK