Curious what you would do.

I have a LH Zastava LKM 85, problem is, the knob on the bolt handel is a bit too small for my large hands. I'd want to a a larger knob. I had posted on a different forum and the answer was too and down and either thread or cut off and eld on a new knob. Problem is, that will be a permanent modification, if I would mess it up that wouldn't be good.

Is their a different solution?
Thought about maybe buying a plastic ball and cutting out a slot them somehow glueing it over the knob.

Any ideas?

I've seen knobs built up in diameter with a rubber dip coating like used on tool handles.

There are also some clam shell type extensions that clamp over the knob.

Hmm! Like liquid electrical tape?

That's what it looked like to me.

https://plastidip.com/

Thanks!

Something like this?

https://mdttac.ca/mdt-bolt-knob/

I have ground and threaded a number of R700 bolt knobs. Easy to do with basic tools.

That looks like the one my friend has. Ugly, but works for him.

https://www.tacticalworks.com/howa-tactical-bolt-knob.html

https://www.anarchyoutdoors.com/clamp-on-bolt-knob-remington-700/

A search for clamp on bolt knobs will get hits.

Google is your friend - an easy fix for your issue, I see references to these from time to time, if you don't like it your are only out $10 and no modification to your existing bolt

https://www.amazon.com/TOURBON-Black-Rubber-Rifle-Resistant/dp/B00YY2ETCK

https://www.grafs.com/catalog/product/productId/28282


drover

Those would be what I'm looking for. Thanks!