Mod H 167xxx 30-30 all no match rubber butt plate broken 2 pieces left

wood pretty nice ,somebody removed the tang peep and put on a williams.

new factory barrel 24 " from 1947 or later fit to original fore arm and latch ,, yes a TD but really tight fit,,not excessive wear on gun , carry wear not sanded ,,??why the new barrel??
need to ask seller tomorrow if he took off the tang peep either a Lyman or Marbles.

norm.

also grabbed an A short rifle 303 all nos ok but sanded

and a EG 300 real nice ecept for four holes in the side of reciever .but the coustomer wants a shooter ser no 761xxx not factory DT

Is it front heavy with that 24 inch barrel? I would think a 1899H with a 24 inch barrel would be off balance, but I have never held one. Heck, a 24 inch barrel in 30-30 is weird, esp for being that late in the game.

Pics?

seams a lot of mid to late 40s barrel were 24 my 30-30- are and 300s have to check 250-3000,

norm

Norm

How many 1940s 30-30s have you seen? The last of the 30-30s were either H (BB), EG, or G. All of those are 20 or 22, mostly 22. There are very few 24 inch 30-30 guns out there but they are not common at all. Unless, I am way off. Which is always a possibility. Dont think so though.

RAS

is the barrel double proof marked?

I was told that all later replacement barrels were 24" with ramp front sights. I have a 22HP barrel with square threads and a Westfield barrel address. It's a TD and lines up with the take down latch on my H and F. It's 24" with ramp front sight, Joe.

" EG 300 ...ser no 761xxx not factory DT"

If that is the correct serial, unusual that it was not D&T'd on top. Actually that is the first non-F in the old receivers after 758335 that I now have in my data.

I have what we think is about the last 30-30 made in the 40s at least the latest we have recorded, EG 439xxx i think Rick has the number , i am not at home.

norm

no just the standard mark.

norm

ya suprised me when i looked at it and said [[to myself]] ah sytt who did that then looked at the ser no,

norm