Hello,

I'm looking for a 99 barrel, with square threads, for an action I'm putting back together. Looking for a Savage barrel source?

Thank You
roundtree

What are you looking for? Caliber? Length? Weight? Model? I've got some and I gotta move so I can lose some.

Finding originals may be a chore, but making one from a barrel blank is not hard to do for any good gunsmith or machinist. The only thing wrong with making one from a new blank is the lack of stamping. For a "shooter' that is not important, and for collectors value,you would need to get the "correct" barrel of the same contour, length, correct sights and all that -----or you are no batter off with one made by Savage then one made by a gunsmith as far as dollar value goes.

Talk to Fireball2 above, before you do anything else.

I have a 24" .300 barrel from Utica I'd like to move down the road.

The group on the left is V thread, group on the right flat thread.

Fireball,
Thanks or the reply.

I need a flat (square thread) Shank. Wow you have a few 99 barrels.
Can you tell me what calibers you have or are they all the same caliber? The 99 I'm trying to get back in shape was made in 1922, so it would need a UItica address.

Thanks again Fireball,

roundtree

What calibers in v thread 300 in f or 308?

L to R



V threads

99A series A 308 22"
.375 new probably not for sale
Westfield .243 22"
99DL 1960-62 .243 24"
99E .243 20" Threads need chased
99E 250-3000 1960-61 rare barrel but has a chink in the chamber area


Flat threads

99F Chicopee Falls 300 22"
1899 303 22" heavy 1911-1919 Utica
1899 303 Octagon 24" Utica
1899 303 octagon 20"1899-1904 Utica
99 300 24" Westfield
1899 22HP 20" inter thread takedown 1911-1919 Utica
1899 30/30 22" bulged neck area, good candidate for rebore
99 300 24" Chicopee Falls
1899 250-3000 takedown (2" short) inter threads 1911-1919
99 EG or R barrel action with some parts 300 Savage

Dang Roy, I have a 1915, 250 action, that needs a barrel. Can you weld a couple inches back on the skinny end?

That one is very disappointing isn't it?

Hello Fireball,

What do you want for the 303 22" heavy 1911-1919 Utica round barrel fireball?

roundtree

Love to buy that 300 f barrel pm me with info

The 300 99F barrel is flat thread. You were asking about V thread weren't you? There is a v thread 308 barrel there.

I realize that I can use the flat thread

I have 2 projects going

Fireball,

PM me with what you are looking to get for the 1899 22HP 20" inter thread takedown 1911-1919 Utica barrel. I've got one from 1915 whose lands seem to be gone. Look down the barrel and it is smooth.

Thanks,

Blitz

turned into quite a garage sale LOL

Fireball,
roundtree here.

I was wondering what you want for the .303 22" heavy barrel with flat threads, and Utica address?

Thanks,

roundtree

roundtree, look for a flashing envelope, that's your private messages.

I'm interested , put prices on em here for the public unless you are looking for the right home for them.

Chris, I was just trying to help out the fella looking for a barrel. $100-200 ?

Next best thing to finding a table of 99 parts at a local gun show.

I think between my thread and this one, we're giving Fireball a 2nd Full-time gig!