Home
Posted By: mike7mm08 Dust Cover C Clip - 06/15/20
Anyone know the size of the C clip on the dust cover rod? Was looking at one of AR pistols today and noticed the rod seems to be out of place. Was sticking out more rearward than usual. Closer inspection revealed the clip was missing. I assume this is something I can pick up at the hardware store, if I know the size. Thanks.
Posted By: Tyrone Re: Dust Cover C Clip - 06/15/20
You cannot pick it up at a hardware store. A gunshop that specializes in AR parts or online is your only bet.
Posted By: plainsman456 Re: Dust Cover C Clip - 06/15/20
Can not tell you the size but the last time i needed one i got it from the auto parts store.

If the rod is out just take it with you.

It's not that hard to put the spring/rod/cover back on the rifle/pistol.
Posted By: deerstalker Re: Dust Cover C Clip - 06/15/20
i bought a pack on amazon.
Neiko 50455A E Clip Assortment Set, 300 Piece Kit | Heat Treated Steel Retaining Rings | 1/16" - 7/8-Inch Sizes
Posted By: gunzo Re: Dust Cover C Clip - 06/15/20
Originally Posted by Tyrone
You cannot pick it up at a hardware store. A gunshop that specializes in AR parts or online is your only bet.



It's small, but still just a common clip. Isn't it?
Posted By: AH64guy Re: Dust Cover C Clip - 06/15/20
Originally Posted by gunzo
Originally Posted by Tyrone
You cannot pick it up at a hardware store. A gunshop that specializes in AR parts or online is your only bet.



It's small, but still just a common clip. Isn't it?


Yes - BUT - most auto stores won't have anything that small on the shelf, not around here anyway.


1/8" "low clearance" C clip

Posted By: Wingmaster83 Re: Dust Cover C Clip - 06/16/20
I picked up half a dozen at Menards for 29 cents a piece.
Posted By: Hudge Re: Dust Cover C Clip - 06/16/20
I was just at Lowe's Sunday looking for a clevis pin, and they had a couple drawers of c clips. I looked through them and they had some pretty small ones. I didn't the exact sizes, but they had a range of sizes.
Posted By: mike7mm08 Re: Dust Cover C Clip - 06/18/20
I know they can be had at a hardware store. Unfortunately the first three stores were out. The box of c clips had a labeled spot for the 1/8 inch, but was empty. Got a couple more places to try.
Posted By: MontanaMan Re: Dust Cover C Clip - 06/18/20
Spending a dollar to save a nickel, eh???

Just order some from Brownell's or elsewhere & be done with it.

MM
Posted By: mike7mm08 Re: Dust Cover C Clip - 06/18/20
I cannot find them in stock online either. Hardware stores have been within my daily travels.
Posted By: MontanaMan Re: Dust Cover C Clip - 06/18/20
Dust Cover C Clip

MM
Posted By: Dillonbuck Re: Dust Cover C Clip - 06/19/20
Originally Posted by MontanaMan
Spending a dollar to save a nickel, eh???

Just order some from Brownell's or elsewhere & be done with it.

MM



Funny.

I called Brownell's to get the detent ball for a Savage extractor. (Don't ask)

He did the computer fu, then ask what else.
"Nothing"

"Well,....They cost $.50, shipping is $8. Let me check something"

He came back to tell me they were a simple 1/8" ball bearing. Try getting
them local.

I did. Fastenal made me buy 200.
For $1.95.


Keep me in mind if you ever need one, or ten.
Posted By: tater74 Re: Dust Cover C Clip - 06/21/20
I have one. PM me your address
© 24hourcampfire