These might be a couple of dumb questions, but I've never had a bolt gun built before.
Prefit barrels will fit these? A guy just needs to buy a barrel, recoil lug, trigger, stock, and action screws, and a rifle can be assembled? Does the extra machine work that was done on these require any extra or special parts?
I've tried calling his shop a couple of times this morning to ask, haven't gotten anyone to answer yet.
Thanks.
> Barrel
> Barrel nut
> Recoil lug
> Stock
> Action Screws
> If BDL: BDL bottom metal, BDL mag box and follower
> If ADL: ADL mag box and follower (IIRC, ADL mag box is ~1/4" different height than BDL mag box)
> Firing pin and cocking piece
> Plunger style ejectors
> Trigger group and trigger pins
> Bolt stop and spring ???
If you are fitting the barrel yourself, will also need:
> Go and No Go gauges
> At minimum, barrel nut wrench. Preferably action wrench also.
I may have missed something. However, I beleive that is the full parts list...