I have two minty, fine German combo. guns, both chambered 7x65r. I need load data for these, using RE-26, 150 or 160 Nossie pts. Please post any you may have.

Don't have the book in front of me but Hornady has load data. None with RE-26 that I recall. 4831, RE22, and RL19 I believe. I use that as a basis for my 7x64 loads.

I use imr 4350 in my 7x64.

I have the Hornady data, a bit "dated", IMO.

Yup. But reduced 280 data is a good starting point.

Found a ton of this ammo recently

At the start of the "Pandemic" it was abundant and inexpensive. Sadly, at that time I was between 7x64's and didn't have the need for the ammo. Recently scored another that was too good a deal to pass on. Ordering brass today.

The 7X65R Barrel on my drilling likes 175 gr best, 40.9 of IMR 4064, and thats Hornadys starting load. IMR 4831 was a close second, I don't remember the charge. Hornady lists IMR 4350 for a 154 gr bullet from 46.9 to a red line of 52.9 I would contact Nosler , or the powder companies for data . It was fun working up loads, but as I said, my Kreighoff liked the heavy bullets.

OP has a ton of RL26 he wants to use up. Still seems slow IMO.

I just got my #10 and #11 Hornady manuals out of storage, seems like RE=19 is good to go. I will also try RE-22 and RE-26 to see how they do.

Let me know me know how that works out. Will be working up loads soon for my new 7x64 so very interested.

empty your mail box

FWIW...

51 grains IMR 4831 under Speer 160 BTSP with WW std primers worked best in two of my drillings, a later Kreighoff Trumpf and a late 60's Sauer. Both had 25" (+or-) barrels.

It worked with PRVI, RWS, and Norma brass. I saw little if any velocity or accuracy difference. It also shot real close to the Norma factory 156gr load, printing around 1.5" higher than the Norma at 100 yards, which I attribute to the heavier bullet and a little slower velocity than the 156 Norma Oryx.

Norma lists a MV of 2,780, and my loads were just shy of 2,700 FPS at average ambient temp of 76F.

There is and has only been one message in there since I logged on a few months ago. So, am unsure of your issue?