A friend bought a RAR and wanted me to lighten his trigger. He likes them at around 2# or so. I took this one down to a little over 3#'s with all the tension off the spring. I would need to go with a weaker spring to adjust below 3#'s. With the adjustment screw completely out of the trigger housing, the spring stays in. So, I guess the trigger would have to be taken apart to get to that spring.
This is the first RAR trigger I've messed with. I have experience taking 700 triggers apart, etc. Just hate to tackle one I've never taken apart before and on another man's gun.
Any suggestions or help would be appreciated.
DF
