Originally Posted by 4th_point
Just be careful with the tabs, other than that it's easy.


Thanks 4th, I heated the mag up with a hair dryer, depressed only the left tab, took my time and she came right apart.

[Linked Image]



Mixed up the Steel Stick and got the compartments filled and I think it turned out okay.

[Linked Image]

Note to anyone else who chooses to do this. I filled all the compartments at one time. The epoxy only has a working time of 3-5 minutes and it got pretty sporty toward the end. If I were to do another I would take more time and just do one cell at a time. I might even consider using Marine-Tex instead for the viscosity. Just my .02 worth.

I will work on the milling part tomorrow. I don't have a drill press so that might get sporty too. cool

twofish

*Master of random precision*