Hobnob and Canazes9, Yes DocCatcher was correct. Same heavy bolt after dry fire.
Sharpshooter, I found this very same article last night and greased the cocking cam but did not polish it. Believe it or not, I am one of the few without a dremmel. Looks like one may be in my near future. I will check to see if it is rough and if so it will be polished and regressed.
As I was taking a close look at everything late last night, I did find the ejector pin has a very small protrusion that is leaving a very small mark/scratch on the headstamp (regardless of if the round was fired or not) so that clearly needs to be smoothed out as well.
