Never not intellesting,to have someone swing by a rifle that "doesn't shoot" and yard it apart for 'em,to pinpoint the glaring shortcomings in it's incorrect assembly. Seen it many many many many fhuqking times,in both OEM and Customs. Hint.
Now first order of bidness is to punch the bore to get a read on ACTUAL twist rate and from there,it's rather easy to connect dots. Simply choose a boolit of repute that'll stabilize in same,kiss,find pressure and rock on. 700 243's are generous in both their typical twist rate and throat geometry,which plays veddy nicely with it's COAL latitude. Them attributes are more than a touch handy. Tough to fhuqk up Lapooey brass wearin' a false shoulder(308 Virgins),105 Hornie HPBT smooch,200's and '17 for increased load density and reduced ES/SD. Hint.
Milk Jug stocks are always more than a "little" suspect and as per The Law Of Averages,perform best when gunned with a heavy hand. Tuck 'em away tight to the shoulder,avoid free recoil,keep the weak hand aboard the platform to keep release consistent and don't put a bipod or rest anywhere forward on the handle. Happiness is found MUCH closer to the recoil lug,less springin' things to create vertical. Hint.
Sounds like glass has been nipped,but the mounting system and it's fasteners,are well beyond suspect until PROVEN otherwise. Undoubtedly the fore base fastener is yammed into the barrel shank threads,which will turn a .25MOA platform into a Blunderbuss. Hint.
Action fasteners are also suspect,until PROVEN and that in conjunction with correct magbox/follower/follower spring assembly. It is a constant that ADL innards are reliably assembled incorrectly,in regards to the box mating the receiver's underside and the follower spring being proud of the box and pinned betwixt it and the Milk jug. Tape is your friend there,with a 3M electrical gut wrap amidship the box and a proud tail exiting beyond the stock's inlet,to be trimmed after CORRECT assembly has been VERIFIED. Hint.
Factory Ammo is always more than a touch suspect. CoreRock's "boast" an exceptionally schitty profile/BC,which by default tends to minimize a leap. That ain't great fhuqking news,but I couldn't objectively weigh ANY rifle's inherent mechanical aptitude,by a box of CoreRock's sourced pre-rolled. Simply ain't how things work in the Real World. Hint.
Why in THE fhuqk one would Mail off sumptin' so glaring in it's incorrect assembly,is beyond me...but I never was any good at fhuqking around. It'd take 10 minutes to ascertain the above,if a guy only had one arm,had a roller skate on his peg leg and was in 30' seas verifying all in the dark. Hint.
The Technical Term is: Starting At The Fhuqking Start. Rifles talk...but NOBODY listens. I'd dangle pics,but am in the middle of a Reloadin' Bonanza.
You've been led to water.
Drink it.
Hint.....................
Nice to see a post with helpful content
I like these better than most of yours
