Thanks for sharing the info. I am loading a 350 grain NOE HP design for my Marlin in 45-70. When I take the HP pins out I will be casting a 405 grain flat nose. If you would, let us know the results of this bullet.
Finished running the first batch of a hundred a few days ago with mixed results, figured at 30:1 they would drop a tad over 330 grs but all were 325.5 + or - with a .4 gr spread at a constant .4597 Dia. Not bad for a double cavity which certainly won't affect accuracy.The mold itself is excellently machined, holds heat well and bullets drop with little effort.
Presently loading a few 45/70 and 45/90's for a trial run so I'll post the results later.
