Yep...have a 4" titanium, a 6" titanium and a 4" stainless...all are great shooters.

Cast bullets...since you cast your own take a look at the Accurate Molds #215V and 250F. I bought the 215V just for the Trackers and the Freedom Arms 97 that also has a short cylinder. I was so pleased with the bullet I asked the owner of Accurate to extend the shank another band and make it a 250 grain...and that became the 250F

[Linked Image]

[Linked Image]



In a Magnum case in the short cylinder 97

[Linked Image]


These are the 250s at 50 yards..they cut clean round holes and the same at 100...

[Linked Image]
215V-250F-250L that will also fit in short cylinders

[Linked Image]


http://www.accuratemolds.com/bullet_detail.php?bullet=41-215V-D.png


http://www.accuratemolds.com/bullet_detail.php?bullet=41-250F-D.png

.37 meplat...90%...can't get any bigger without being a wadcutter...

I know that both Ron and Idaho Shooter have these guns and love them...great find...

Bob

If you can not deal with reality, reality will deal with you....