Finally getting back to work on this. I had a lot of parts from DIP on back order that finally arrived. I always do "before" and "after" testing so I mounted the DIP 25MoA base and an SWFA Super Sniper 6x for testing.
[Linked Image]
I had 100 rounds of CCI Quiet-22 I wanted to burn up since it is only 750fps at the muzzle. These are the 25m groups. Groups at 50m were about an inch and took 2.5mil from the 25m zero. Groups at 100m took 6.5mil from 25m zero , were about 3 inches and was mostly wind as elevation held at around an inch. I kept the other box for post bedding testing.
[Linked Image]