The cabinet section of the bench is screwed and glued together.
I always drill pilot hols when screwing into plywood.
I find that is really worth the extra effort.
The sliding doors and interior shelves on both sides are removable.
It is held to the bench by 8 #10 Wood Screw.
The back behind the lower shelf is screwed on with wood screws. Everything else is assembled with carriage bolts.
My bench breaks down to the cabinet, both sides (Contain the legs), bench top, 1/4" lower shelf back, and lower shelf.
Each piece of the assembly is single man portable.
Heaviest is the bench top.
I can assemble the bench by myself, but two people make it easier.
Steve
Last edited by Steve_Cover; 01/15/17.
