Home Forums Hunting & Shooting Hunting Optics SWFA 3-9 on a Montucky, how?

So after a bit of scope slippage in the Signature Zee rings, I decided to swap them out on the 84m 7-08 for some XTR Sigs, as well.

The same fitment occurred on the 84m as on the 8400. This set of rings was ordered a week ago, so they are very recent manufacture, I assume. The lug is offset, just like the rings on the 8400. With both the 84m and the 8400 the rear ring has to be oriented into the action, or else it interferes with the operation of the bolt if I flip it around and favour the rear of the base with the ring. I'm very curious about the lugs in your rings, now.