I received my brackets last week and they are really nice. The welds are perfect, great product.

Like most have done, I glued and screwed together 2 pieces of 3/4” plywood and sawed out my pattern similar to the plan that came with the brackets. The bench turned out really well.

The top is very solid and has no flex at all as far as I can tell. There is no movement at all, front to back but one thing that I have noticed is that I have a slight side to side movement at the rear of the bench.
I double checked the bolts and legs to be sure they were all tight but still have slight movement. The movement is noticeable with the rifle shouldered and on target. I’m using both front and rear bags and don’t have this problem with my permanent bench.

I assume the movement is from having only one leg in the rear and may have to add another leg to the rear to stabilize it.

Anyone else have this movement issue?


[Linked Image from i.postimg.cc]