I just pulled my Manual out for my safe and it does not mention spinning the dial to the left to reset the lock.
"If you go past a number when you meant to stop - even if only by half a number - the entire sequence must be redialed". this is all that is mentioned in the manual that came with my model.
Tomorrow I will try spinning the dial five or six times to the left to clear the combination so I can start over and see if that works. I have not tried doing that in a long time so maybe I just did not spin it enough times for it to take effect.
The procedure listed in my manual to set the combo is as follows.
Turn dial left stopping on first number the fourth time this number aligns with opening index.
Turn the dial right stopping on the 2nd number the third time this number aligns with index.
Turn dial left stopping on 3rd number the 2nd time it aligns with index.
When I called Liberty I was told that this would need to be done if I missed entering the combination correctly.
Thanks for the help, I will give it a try tomorrow and see where I get with it.
