Pointer,
I think that the barrel is about done on my 7mm. I have shot it a lot over the years and was considering getting a new Schillen or similar installed in the offseason. Some of my previous "best" loads are no longer shooting well, but I now have found this load with the 160 Accubond that shoots really good so I have held off for the meantime.
I have installed a Nutmeg Laminated stock from Boyds on the rifle, had the trigger adjusted properly and installed a nice scope. The barrel currently is free floated and a good member here on these boards sold me some bottom metal so that I could have a hinged floor plate which it didn't have before the Boyd's stock. So I really like this rifle with the exception of a new barrel which is in the plans.
