Home Forums Reloading Big Game Rifles reloading bench pics plz

I posted mine to an earlier thread so here mine is again:

This is the "clean" bench with nothing but the vise mounted


There's three slots like this in the bench to enable mounting of accessories, presses, etc.


This is the bench in operation with Forster Coax mounted. The other presses sit in perches below at the adjacent bench to the left.


This shows more detail of the slots and mounting "sandwiches" on a Rock Chucker.

Shell holders, bushings, measuring tools and Stoney Point.


Storage for the regularly and commonly used dies. Unused ones stay in there boxes here and elsewhere.


Since the original pictures were taken I've added a mini lathe which is extremely useful for brass prep and other loading activities, just mount primer pocket uniformers, flash hole reamers, etc. and go through a batch of brass quickly. Beats the RCBS prep center for just a few bucks more.
[img]http://i25.photobucket.com/albums/c66/Bob338/100_0943-1.jpg[/img]

The pistol reloading bench is to the left of these pictures where the Dillon XL650 is mounted along with all its accessories, powders, primers etc.