Home Forums Hunting & Shooting Hunting Rifles DIY bedding M77 (pic heavy)

wow, very nice andre. That's a level above what I have shown with my acra glass gell progect

looks like someone did a full action fit & broke out the clay for bedding dams & everything.

Well, I tinkered again last night a little. I sealed up the wood inside the barrel channel with some linseed oil (it's what I had laying around)



I pealed the release agent clean from everything and re drilled the action screw holes.







Then I got looking at the trigger. I'm ok with a "hunting wieght" pull, but it had too much creep. So I fixed that problem while I had the action out of the stock. I did a little work to the factory trigger and I'm very happy with it now.



Then I put it all back together.







[img]http://i43.photobucket.com/albums/e364/northerndave/rifle%20bedding/Picture062.jpg[/img]

Now I'm ready for a range test.