The Trappers are a lot of fun. Before you pull the safety place an o-ring on the left side. The o-ring helps to prevent inadvertent activation of the safety.
There are two �fixes� I have seen on the internet for the safety � the safety is easy to remove � use a paper clip to depress the ball detent and slid it out. The problem is covering the divot on the right side of the receiver. The �fixes� vary from coins soldered into the hole to a replacement for the safety with cone shaped filler for the hole. The problem with this second �fix� is the new cross bolt and filler still must be removed to pull the sliding bolt.
Last edited by william_iorg; 12/26/09.
