The photos are werking now.....and the action you described is exactly the one I was thinking of.....
Turning a Mauser into a fine sporter can be done in many different ways....ranging from fairly cheap to beastly inexpensive
Here's an example:
Safety conversion....a timney flag safety will allow you to use a scope and will cost less than $50 and you probably can install it yourself....or you can have a smith install a LaPour three position safety for about $300.....(wow)
Trigger can be "shimmed" and used "as is"....cost is only some of your time.....or add a Timney for about $50....you can do this yourself too!
Some smiths will weld on a stylish new bolt handle for roughly $100.....or you can find someone to forge the one you have for less than half that.
A new A & B barrel can run about $150 installed.....ir you can specify another barrel for up to $600.
You can get an overmolded synthetic stock for about $100.....or a wood masterpiece for well over $1,000.....
My point is that a custom Mauser will vary immensely in price depending on what you want.....
Probably a minimum is about $500......and you can go to $10,000 if you want!
