I pretty much own a mould for every caliber I own, and always have shot reduced loads for pretty much anything I cast for...
I think most guys will download the 45-70 with cast, as well as the 444, etc.
I have hunted cast with both of the above, as well as the 40-82 Win,375 Win, 356 Win, 35 Rem, 30-30, 32-20, 257 Roberts, 25-20
and 44Spec/Mag.
TrailBoss has a similar recipe that will work in any centerfire rifle....
1) Mark case(sharpie) at bottom of where bullet will be seated.
2) Fill case to this mark with Trailboss...weigh this charge....it is your 100% load.
3) You can reduce this load down to 60% as your starting load, and load to anywhere in between. Just multiply the charge weight in grains by 60%/70%/80% whatever you want. Hodgdon techs will give you this formula if you would like to check it out.
johnny
