Home Forums Hunting & Shooting Hunting Rifles Sako 85 (or other suggestions)

Thanks for your reply. My last 85 is basically a chrome moly Finnlight with Rechnagel sights. I'm running a 30mm scope and used the lowest Optilocks I could get, which are their new 1-piece ringmounts. These mounts place the scope tube center 1.64" above the bore centerline.



When using an aperture sighting tube mounted within these ringmounts in lieu of the scope, the 1.64" height is near ideal for my line of sight when using the factory Sako comb. I have an Edge on my old M70, and several have suggested I replace this factory Sako stock with one. But, I was concerned the comb height on the Edge models which may save me a bit of weight would drop my line of sight too low. Thanks for your input.




Best