Guys:

I got 'er fixed. I sanded a piece of walnut block with an arc to march the one on the butt stock and then glued some 150 grit paper on and worked on the toe and heel of the butt end. Then I ran out of patience and mixed up some black epoxy and put a thin beed on the edge of the butt plate (with release agent first) and then installed in on the stock. Cleaned it up with Q-tips soaked in acetoneand then sanded the edges down with 400, then 600 grit. Perfect fit all the way around. Looks like "guild" quality work (wink).

Thanks for all your help. I've got a beautiful piece of wood. Will post photos when done.


Jordan

Last edited by RobJordan; 08/24/14.
Communists: I still hate them even after they changed their name to "liberals".
____________________

My boss asked why I wasn't working. I told him I was being a democrat for Halloween.