Originally Posted by 458 Lott
LED's alone won't cure your problems, good wire is a must

[img]http://i.ebayimg.com/00/s/MTYwMFgxNTEx/z/baUAAOSwDN1US~b7/$_35.JPG?set_id=880000500F[/img]

and sealed splices

[Linked Image]

and use some dialectric grease on the plug connection

[Linked Image]
Dialectric grease is NON-conductive so it must be used right. The wires must have a very solid attachment or the grease can get between the wires and block the current flow. It works great to keep moisture out of the connector but can be counterproductive if it gets IN the connector.

If you want to pack the connector full of grease, there are conductive greases to use instead.

“In a time of deceit telling the truth is a revolutionary act.”
― George Orwell

It's not over when you lose. It's over when you quit.