Home Forums Hunting & Shooting Hunting Rifles Crappy shooting Montana (for real)!

I figured this thread would get attention.

To answer some of the questions and comments.

I was shooting with a front rest and a rear bag but was holding the forend behind the rest to reduce the hop off the bag instead of letting it free recoil.

The rings are new and not cracked. The scope is proven but I may try a different one that the road if nothing else works.

I have some 140gr A-Max, SMK's, Scenars and 130gr Bergers that I may load to try if a "target" bullet would be more accurate.

The barrel was scrubbed down to metal and DBC applied. Shot 10-12 rounds to cure the product and cleaned with Wipe-out prior to this range session. I cleaned the barrel with Wipe-out after this range session and it didn't appear to be overly dirty.

I'm going to take it out of the stock tomorrow and check the mag box, action screw length and scope base screws to start with.

Fingers crossed.