|
Joined: Oct 2015
Posts: 4
New Member
|
OP
New Member
Joined: Oct 2015
Posts: 4 |
Before my dad passed away he gave me a custom rifle he had built for him in 1968. It’s a FN 400 action with a Douglas premium barrel in 7x61 Sharpe & Hart (24”, 1 in 12” twist). It’s got a grade AAA burl stock with checkering. It has a Leupold Varix 3x9 scope. I don’t reload so I’ve got to make a tough decision on whether to keep or sell. If anyone can help out with value I’d appreciate it. Thanks. Pics can be seen at the following link: [img] http://s410.photobucket.com/user/tomsilentj/media/FN%20Mauser/15Oct_fn_077_zpsmphbkj7l.jpg.html?o=0[/img]
|
|
|
|
Joined: Jun 2005
Posts: 2,631
Campfire Regular
|
Campfire Regular
Joined: Jun 2005
Posts: 2,631 |
Well.. the stock is "ugly" compared to todays standards. But if my father gave it to me, I would never sell it!
Give it a few years, and you might take up reloading..
The US in the last 40 years:
Socialism for big corporations and military industrial complex
&
Rugged individualism for the individual.
|
|
|
|
Joined: May 2004
Posts: 2,676
Campfire Regular
|
Campfire Regular
Joined: May 2004
Posts: 2,676 |
If ammo is the problem it would be worth talking to a gunsmith on possible rechambering to 7mm rem mag. I am not a gunsmith and do not know how possible that is. The 1-12 twist may pose a problem with stabilizing heavier bullets. No idea on value your side of the border.
|
|
|
|
Joined: Oct 2015
Posts: 4
New Member
|
OP
New Member
Joined: Oct 2015
Posts: 4 |
Thanks. There were plenty of other keepers and I'm not getting any younger.
|
|
|
|
Joined: Oct 2015
Posts: 4
New Member
|
OP
New Member
Joined: Oct 2015
Posts: 4 |
re: rechambering. I hadn't considered that, if its possible. Thanks
|
|
|
|
Joined: Dec 2010
Posts: 1,869
Campfire Regular
|
Campfire Regular
Joined: Dec 2010
Posts: 1,869 |
I don't know the value of that rifle but I do have a Schultz&Larsen 7x61 w/ a 12" twist. I live @ 6000 ft. and have no trouble w/ that rifle stabilizing any flat based bullet. It will probably cost me my "looney"card but when I found a load that would work for me I quit messing around & went out & shot stuff!!! 7x61 Super is the same cartridge & will work in that rifle. As Northman said keep it!!!! And enjoy
"The more I am around people the better I like my dog." Mark Twain
|
|
|
|
Joined: Apr 2005
Posts: 8,092
Campfire Outfitter
|
Campfire Outfitter
Joined: Apr 2005
Posts: 8,092 |
That stock has potential....whittled down a bit it would clean up nicely.
“Factio democratica delenda est"
|
|
|
|
Joined: Nov 2010
Posts: 37,153 Likes: 3
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2010
Posts: 37,153 Likes: 3 |
Well.. the stock is "ugly" compared to todays standards. But if my father gave it to me, I would never sell it!
Give it a few years, and you might take up reloading.. "Ugly" seems a bit harsh, "dated" for sure. That gun is typical of 1960's "pretty". Workmanship seems good, wood shows figure, components are excellent and who knows, it may shoot. If it was mine, given to me by my Dad, I'd reload for it and at least see what it would do. If it was bedded right, it should shoot. And even if not, bedding can be re-worked. IMO, DF
|
|
|
|
Joined: Dec 2000
Posts: 241
Campfire Member
|
Campfire Member
Joined: Dec 2000
Posts: 241 |
Look at he dimensions in a reloading manual.
I think the best thing to do is have a gunsmith turn it into a 7mm Remington Mag. Buy ammo, and have fun.
|
|
|
|
Joined: May 2004
Posts: 2,676
Campfire Regular
|
Campfire Regular
Joined: May 2004
Posts: 2,676 |
If it was mine and I wanted to keep it I think that stock could be reworked quite nicely. Just redoing the grip cap area would go a long way towards that end, and I'd change up the recoil pad. Nice rifle, there is no way I'd get rid of it if it was mine in similar circumstances.
|
|
|
|
Joined: Nov 2013
Posts: 28,836 Likes: 8
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2013
Posts: 28,836 Likes: 8 |
Huntington's has brass. Shouldn't be too hard to find someone to fill'em up for you. It's not like you're going to be doggin' with it.
It's a very nice rifle. That funky grip cap could be replaced or simply "enjoyed" as a retro piece. It was, after all, to your Dad's taste at some point.
Last edited by Pappy348; 10/04/15.
What fresh Hell is this?
|
|
|
|
Joined: Nov 2010
Posts: 37,153 Likes: 3
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2010
Posts: 37,153 Likes: 3 |
Before my dad passed away he gave me a custom rifle he had built for him in 1968. It’s a FN 400 action with a Douglas premium barrel in 7x61 Sharpe & Hart (24”, 1 in 12” twist). It’s got a grade AAA burl stock with checkering. It has a Leupold Varix 3x9 scope. I don’t reload so I’ve got to make a tough decision on whether to keep or sell. If anyone can help out with value I’d appreciate it. Thanks. Pics can be seen at the following link: [img] http://s410.photobucket.com/user/tomsilentj/media/FN%20Mauser/15Oct_fn_077_zpsmphbkj7l.jpg.html?o=0[/img] I've been looking at those photos. I put my finger over that hooked grip cap and without that '60's hook, it would look a lot more "modern". Try that and see what you think. If it was mine, I'd cut that rosewood grip cap down to about 3/16" to 1/4" thick and refinish. The checkering, although skip a line, is very well done. I don't think I'd do anything else. Just an idea. DF
|
|
|
|
Joined: Oct 2015
Posts: 4
New Member
|
OP
New Member
Joined: Oct 2015
Posts: 4 |
Thanks to all for comments and suggestions.
|
|
|
|
650 members (1beaver_shooter, 16gage, 160user, 1Longbow, 01Foreman400, 12344mag, 70 invisible),
3,011
guests, and
1,273
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,622
Posts18,492,717
Members73,972
|
Most Online11,491 Jul 7th, 2023
|
|
|
|