|
|
Joined: Sep 2008
Posts: 1,036
Campfire Regular
|
OP
Campfire Regular
Joined: Sep 2008
Posts: 1,036 |
Need some info on modification of a synthetic stock. Need the stock shorten for the wifes ruger mk ll. Anyone done this? thanks
|
|
|
|
Joined: Apr 2010
Posts: 8,190 Likes: 2
Campfire Outfitter
|
Campfire Outfitter
Joined: Apr 2010
Posts: 8,190 Likes: 2 |
Is it the boat paddle, if so there's not much you can do that is going to look very good. If it's the newer style synthetic just cut the desired amount off with a tablesaw or miter saw. Sand the end smooth and most importantly square, and glue a pad on with epoxy. When it dries grind it down flush with a belt sander or something similar.
|
|
|
|
Joined: Nov 2013
Posts: 1,296
Campfire Regular
|
Campfire Regular
Joined: Nov 2013
Posts: 1,296 |
I'm pretty sure one of the pad companies makes a pad for the boat paddles that comes with an adapter that epoxies into the stock and gives you a second hole to screw into. I would suggest posting this in the hunting rifles forum as that is where I saw the picture of it. If it's the current type synthetic, I would still suggest cutting out an adapter from a suitable plastic to make it a much more secure mount.
John
|
|
|
|
Joined: Sep 2008
Posts: 1,036
Campfire Regular
|
OP
Campfire Regular
Joined: Sep 2008
Posts: 1,036 |
Thanks. It is not the boat paddle style.
|
|
|
|
590 members (1lessdog, 163bc, 01Foreman400, 1234, 1badf350, 007FJ, 57 invisible),
2,450
guests, and
1,264
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,568
Posts18,491,848
Members73,972
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|