|
|
Joined: Nov 2015
Posts: 473
Campfire Member
|
OP
Campfire Member
Joined: Nov 2015
Posts: 473 |
I'm getting 2900+ from factory Remington Premier ammo with 160 grain Partitions in 7 SAUM. I disassembled one of the loads and it looked like a ball powder instead of stick. It also higher than the max listed on the Nosler's website.
Ok, now my question. Anybody have any idea what powder Remington could've used in their loads? I know it's a long shot question, but thanks for any info.
|
|
|
|
Joined: Jul 2001
Posts: 60,236 Likes: 29
Campfire Kahuna
|
Campfire Kahuna
Joined: Jul 2001
Posts: 60,236 Likes: 29 |
Two comments:
A lot of factory loads don't use a powder handloaders can buy.
Nosler's data for the 7mm SAUM is very limited.
Question: Did you weigh the powder charge?
“Montana seems to me to be what a small boy would think Texas is like from hearing Texans.” John Steinbeck
|
|
|
|
Joined: Nov 2015
Posts: 473
Campfire Member
|
OP
Campfire Member
Joined: Nov 2015
Posts: 473 |
Two comments:
A lot of factory loads don't use a powder handloaders can buy.
Nosler's data for the 7mm SAUM is very limited.
Question: Did you weigh the powder charge? 60.4 grains
|
|
|
|
Joined: Jan 2005
Posts: 38,937 Likes: 11
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jan 2005
Posts: 38,937 Likes: 11 |
And the next box of factory ammunition might have an entirely different powder, if I understand correctly.
Not a real member - just an ordinary guy who appreciates being able to hang around and say something once in awhile.
Happily Trapped In the Past (Thanks, Joe)
Not only a less than minimally educated person, but stupid and out of touch as well.
|
|
|
|
Joined: Jul 2004
Posts: 501
Campfire Regular
|
Campfire Regular
Joined: Jul 2004
Posts: 501 |
Western powder shows a starting load of 60.0 gr of Accurate MagPro powder with the 160 gr Sierra gameking, with a max of 66.0 gr for just over 3000 fps. Might be a place to start.
|
|
|
|
Joined: Jan 2013
Posts: 378
Campfire Member
|
Campfire Member
Joined: Jan 2013
Posts: 378 |
Except Nosler, no major factory uses canister grade powder. None of them load by weight, they load by volume based upon burning rate. So attempting to match a weight won't do you any good.
I'm a firm believer in the theory of " If it bleeds, I can kill it".
|
|
|
|
Joined: Nov 2011
Posts: 31,183 Likes: 7
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2011
Posts: 31,183 Likes: 7 |
Except Nosler, no major factory uses canister grade powder. None of them load by weight, they load by volume based upon burning rate. So attempting to match a weight won't do you any good. So my powder measure, which throws by volume cannot throw charges of a consistent weight?
You didn't use logic or reason to get into this opinion, I cannot use logic or reason to get you out of it.
You cannot over estimate the unimportance of nearly everything. John Maxwell
|
|
|
|
Joined: Jan 2013
Posts: 378
Campfire Member
|
Campfire Member
Joined: Jan 2013
Posts: 378 |
That wasn't my point. They don't load trying to hit a weight, they load trying for a volume based upon lot tested burning rates.
With ball powder, I'm sure you may be able to hit a pretty tight weight. Since coatings control it's burning rate, volume can get you into Pressure issues with ball powder if you have a variable VMD. With extruded powder, the weight will always vary in a larger fashion. Since geometry is what controls it's burning rate, it's all good that there may be a difference.
Last edited by Darkker; 02/11/16.
I'm a firm believer in the theory of " If it bleeds, I can kill it".
|
|
|
|
571 members (160user, 1lessdog, 1_deuce, 12344mag, 10Glocks, 22kHornet, 57 invisible),
2,449
guests, and
1,268
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,194,361
Posts18,527,204
Members74,031
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|