|
Joined: Aug 2010
Posts: 48,302 Likes: 37
Campfire 'Bwana
|
OP
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,302 Likes: 37 |
BobinNH wanted someone to start this thread. I've had one extractor go bad on my 270 fwt, but that's been it. Easily pulled the bad one off and put the new one on. Anyone else have any issues with a pre 64 model 70 rifle? All of mine function flawlessly, triggers work perfectly and tuned to 2.5 pounds, safety's work great, bolt stops work, they extract, eject, feed perfectly and smoothly, bolt handles haven't fallen off or anything like that. Let's hear about your failures. Thanks...
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style. You want to see an animal drop right now? Shoot him in the ear hole. BSA MAGA
|
|
|
|
Joined: Jan 2010
Posts: 8,187
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2010
Posts: 8,187 |
Here is my list of failures;
220 Swift - None 257 Roberts Super Grade - None 264 Win Mag Westerner FWT- None 270 FWT- None 30-06 Standard weight - None 30-06 custom - None 300 Win Mag - None 300 H&H Mag - None 338 Win. Mag - None 358 Win. FWT. - None 375 Win Mag. - None
Life Member...Safari Club International Life Member...Rocky Mountain Elk Foundation Life Member...Keystone Country Elk Alliance Life Member...National Rifle Association
|
|
|
|
Joined: Nov 2002
Posts: 33,821 Likes: 15
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2002
Posts: 33,821 Likes: 15 |
I won't get specific with the few I own but about like my post nil issues with '64 M70's, M700's, M98, M96 and M77's, nil.
Conduct is the best proof of character.
|
|
|
|
Joined: Feb 2010
Posts: 17,880 Likes: 3
Campfire Ranger
|
Campfire Ranger
Joined: Feb 2010
Posts: 17,880 Likes: 3 |
40 yrs. shooting/hunting with pre'64 M/70's zero problems to report.
|
|
|
|
Joined: Jan 2007
Posts: 20,814
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2007
Posts: 20,814 |
Pin that allows the safety to line up and function disappeared on one. Smith replaced it. On another, pin that lines up a piece that allows the bolt to move completely rearward came loose. I peened it over and all has been good.
Last edited by battue; 09/19/16.
laissez les bons temps rouler
|
|
|
|
Joined: Dec 2004
Posts: 14,488
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2004
Posts: 14,488 |
Had to replace an extractor on a pushfeed M70 in .223 to cure an ejection problem. Also had to bend the upper lip of the mag box out a little because it kept barfing the next-to-last round during feeding. The rifle was previously owned.
Don't be the darkness.
America will perish while those who should be standing guard are satisfying their lusts.
|
|
|
|
Joined: Aug 2016
Posts: 175
Campfire Member
|
Campfire Member
Joined: Aug 2016
Posts: 175 |
The pre-64 action is about as rock solid as you will find. It's not surprising we're seeing a lot of "no problems" reported in response to this topic. The main "weakness" of the pre-64 action (if you could label it this way), is wear at the engagement point between the safety cam and the firing pin. The pin can wear at this location, making the safety stiff, or in extreme cases, permit the pin to creep forward. This is not a design flaw, but results from poor maintenance (lubricating) of the pin and bolt sleeve. The trigger and sear can also wear if not kept clean and oiled, which results in a terrible "two-stage" trigger pull. Bottom line - properly maintain your pre-64 action and it will last several lifetimes of regular use. Neglect it and you'll be visiting my website for replacement parts
|
|
|
|
Joined: Mar 2004
Posts: 2,628 Likes: 1
Campfire Regular
|
Campfire Regular
Joined: Mar 2004
Posts: 2,628 Likes: 1 |
_
That's about it after 33 years of using them, and having owned 19 different rifles.
I guess that's why I like them.
|
|
|
|
Joined: Dec 2014
Posts: 2,973 Likes: 2
Campfire Regular
|
Campfire Regular
Joined: Dec 2014
Posts: 2,973 Likes: 2 |
I tried to figure out how many M70's have passed through my hands and lost count around 50 (and I still have more than a few) and I have NEVER experienced a mechanical problem. The only thing I have ever done was have the stock refinished on a 308 FWT simply because the original finish wore off and bare wood was exposed.
|
|
|
|
Joined: Aug 2016
Posts: 175
Campfire Member
|
Campfire Member
Joined: Aug 2016
Posts: 175 |
We all were taught by our dad or grandfather to frequently field-strip, clean, and oil our guns. This is why an 80 year old rifle can have a tight action and pristine bore, despite the fact almost all bluing is worn off from use. Not everyone was taught to care for their rifles in this way.
We frequently get rifles into the shop which are so poorly maintained, it's truly mind blowing. The ejectors are cemented into the receiver with a paste of dirt, rust and oil residue. The bolt lugs are galled at the contact points. The extractor ring will barely rotate on the bolt, and underneath the ring we find it dry and dirty. The barrel channel is packed with pine needles and the barrel is pitted with rust from decades of hunting and never pulling the action out of the stock, etc, etc. When people do this, they can expect "failures", even though it is hardly the fault of the rifle design.
|
|
|
|
Joined: Jan 2007
Posts: 35,900
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jan 2007
Posts: 35,900 |
I tried to figure out how many M70's have passed through my hands and lost count around 50 (and I still have more than a few) and I have NEVER experienced a mechanical problem. The only thing I have ever done was have the stock refinished on a 308 FWT simply because the original finish wore off and bare wood was exposed. I am right there with GSP numbers wise. I broke one extractor a few years ago. I changed it out with an Enfield extractor. Done. I have (had) one that went through three barrels before I sold it. Another 7 RM that was a favorite and the barrel burned out in about 1500-2000 rounds. I hunted both of them everywhere. Ditto a 300 Win Mag,338,a couple of 375"s (yes they hunted Alaska and killed two brown bears. Not safe queens.) 220 Swift, 257 Roberts,30/06's, other 270's 264's 300 H&H 300 Win Mag, H&H converted to Weatherby.....on and on it goes... Not a bauble with any of them.. The one below started life as a factory 270 FW. I sold it a couple years ago and built/bought a duplicate (that some dope from Alaska recently called a "safe queen". Indeed....it's only one year old and only been on two hunts last year. Both successful. i bumped into a 243 Standard Grade today for a grand. I may buy it. I hate the cartridge but I know the rifle will work and shoot.
Last edited by BobinNH; 09/20/16.
The 280 Remington is overbore.
The 7 Rem Mag is over bore.
|
|
|
|
Joined: Apr 2011
Posts: 1,468
Campfire Regular
|
Campfire Regular
Joined: Apr 2011
Posts: 1,468 |
|
|
|
|
Joined: May 2005
Posts: 17,147 Likes: 2
Campfire Ranger
|
Campfire Ranger
Joined: May 2005
Posts: 17,147 Likes: 2 |
Many years ago I realized that the front site hood from my P64 M70 Fwt .243 was no longer attached and was somewhere on Chestnut Oak Mountain. Hardly a failure and that rifle is in at the smith for a new barrel it's had enough rounds down it (>5K). No problem with the .257R or .300 H&H either. They are not light nor modern but they are my rifle of choice.
If something on the internet makes you angry the odds are you're being manipulated
|
|
|
|
Joined: Nov 2015
Posts: 1,956
Campfire Regular
|
Campfire Regular
Joined: Nov 2015
Posts: 1,956 |
"They are not light nor modern but they are my rifle of choice."
That just about sums it up for me too!
Last edited by Bobmar; 09/20/16.
Deadlines and commitments, what to leave in, what to leave out...
|
|
|
|
Joined: Dec 2014
Posts: 2,973 Likes: 2
Campfire Regular
|
Campfire Regular
Joined: Dec 2014
Posts: 2,973 Likes: 2 |
A STD 243 for a grand is a good deal if it's in any kind of decent condition. I have both a std and a fwt but much prefer the 257 Roberts.
|
|
|
|
Joined: Aug 2010
Posts: 48,302 Likes: 37
Campfire 'Bwana
|
OP
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,302 Likes: 37 |
Here is my list of failures;
220 Swift - None 257 Roberts Super Grade - None 264 Win Mag Westerner FWT- None 270 FWT- None 30-06 Standard weight - None 30-06 custom - None 300 Win Mag - None 300 H&H Mag - None 338 Win. Mag - None 358 Win. FWT. - None 375 Win Mag. - None
I think if you have model 70 in your name, you are too biased to answer... That goes for model70man, winpoor, etc... . Geez Don, looks like a damn fine track record...
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style. You want to see an animal drop right now? Shoot him in the ear hole. BSA MAGA
|
|
|
|
Joined: Aug 2010
Posts: 48,302 Likes: 37
Campfire 'Bwana
|
OP
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,302 Likes: 37 |
Had to replace an extractor on a pushfeed M70 in .223 to cure an ejection problem. Also had to bend the upper lip of the mag box out a little because it kept barfing the next-to-last round during feeding. The rifle was previously owned. RiverRider, those are post 64's. Any problem with any pre 64 model 70's?
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style. You want to see an animal drop right now? Shoot him in the ear hole. BSA MAGA
|
|
|
|
Joined: Aug 2010
Posts: 48,302 Likes: 37
Campfire 'Bwana
|
OP
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,302 Likes: 37 |
Pin that allows the safety to line up and function disappeared on one. Smith replaced it. On another, pin that lines up a piece that allows the bolt to move completely rearward came loose. I peened it over and all has been good. Thanks battue, that's the kind of info we are looking for. If anyone else runs into this kind of issue, it may help. I've yet to have a pin fall out on any of mine..
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style. You want to see an animal drop right now? Shoot him in the ear hole. BSA MAGA
|
|
|
|
Joined: Aug 2010
Posts: 48,302 Likes: 37
Campfire 'Bwana
|
OP
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,302 Likes: 37 |
We all were taught by our dad or grandfather to frequently field-strip, clean, and oil our guns. This is why an 80 year old rifle can have a tight action and pristine bore, despite the fact almost all bluing is worn off from use. Not everyone was taught to care for their rifles in this way.
We frequently get rifles into the shop which are so poorly maintained, it's truly mind blowing. The ejectors are cemented into the receiver with a paste of dirt, rust and oil residue. The bolt lugs are galled at the contact points. The extractor ring will barely rotate on the bolt, and underneath the ring we find it dry and dirty. The barrel channel is packed with pine needles and the barrel is pitted with rust from decades of hunting and never pulling the action out of the stock, etc, etc. When people do this, they can expect "failures", even though it is hardly the fault of the rifle design. Amen buddy!!!
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style. You want to see an animal drop right now? Shoot him in the ear hole. BSA MAGA
|
|
|
|
Joined: Aug 2010
Posts: 48,302 Likes: 37
Campfire 'Bwana
|
OP
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,302 Likes: 37 |
I tried to figure out how many M70's have passed through my hands and lost count around 50 (and I still have more than a few) and I have NEVER experienced a mechanical problem. The only thing I have ever done was have the stock refinished on a 308 FWT simply because the original finish wore off and bare wood was exposed. I am right there with GSP numbers wise. I broke one extractor a few years ago. I changed it out with an Enfield extractor. Done. I have (had) one that went through three barrels before I sold it. Another 7 RM that was a favorite and the barrel burned out in about 1500-2000 rounds. I hunted both of them everywhere. Ditto a 300 Win Mag,338,a couple of 375"s (yes they hunted Alaska and killed two brown bears. Not safe queens.) 220 Swift, 257 Roberts,30/06's, other 270's 264's 300 H&H 300 Win Mag, H&H converted to Weatherby.....on and on it goes... Not a bauble with any of them.. The one below started life as a factory 270 FW. I sold it a couple years ago and built/bought a duplicate (that some dope from Alaska recently called a "safe queen". Indeed....it's only one year old and only been on two hunts last year. Both successful. i bumped into a 243 Standard Grade today for a grand. I may buy it. I hate the cartridge but I know the rifle will work and shoot. I love that "safe queen" Bob. Looks just like mine, except your stock is a different color. On by the way, thanks for that little enfield extractor trick. I liked my "spare" better and pulled the extractor off my m1917 and replaced it with a pre 64 model 70 extractor. Now the spare is the M1917 one :
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style. You want to see an animal drop right now? Shoot him in the ear hole. BSA MAGA
|
|
|
|
588 members (10Glocks, 12344mag, 16Racing, 1234, 160user, 10gaugeman, 63 invisible),
2,502
guests, and
1,319
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,194,346
Posts18,526,939
Members74,031
|
Most Online11,491 Jul 7th, 2023
|
|
|
|