|
Joined: Jan 2008
Posts: 242
Campfire Member
|
Campfire Member
Joined: Jan 2008
Posts: 242 |
Do you have any trouble seeing rats with that 1-6X? If you get a 4-14X I'd be interested to see how you compare the glass to your SWFA 12X. Probably good enough for Democ-rats LOL oh well "can't we all just get along?" LOL. Be happy you're in Tri cities and not over in Seattle. When I was in LE/ Mil. outside sales I'd stop by SPD's training center and there would be hypodermic needles all over the parking lot. I was always happy to head east towards you all while traveling to MT.
|
|
|
|
Joined: Nov 2003
Posts: 18,355 Likes: 1
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2003
Posts: 18,355 Likes: 1 |
what scope are you using goforbroke? what ammo?
|
|
|
|
Joined: Jan 2008
Posts: 242
Campfire Member
|
Campfire Member
Joined: Jan 2008
Posts: 242 |
When I made the headshot I just finished assembling my M4 and had a cheesy Bushnell Banner Scopechief on it. I got it on trade and was the only spare scope I had. My handloads using once fired Federal brass I got from the range, Nosler 2nds 55gr BT under some TAC. I swapped that scope off and had a Zeiss Conquest 1.8-5.5x32mm on there afterwards. I just sold that scope last week and am considering the PA 1-6X for the M4. I have a Nikon 4-12X Mildot on the HBAR right now. My load is 50gr VMAX under TAC or H4895. I might try H322 or H355. I'll be shooting the 53gr VMAX latter this season as the rats get more wary.
|
|
|
|
Joined: Jan 2008
Posts: 242
Campfire Member
|
Campfire Member
Joined: Jan 2008
Posts: 242 |
I just noticed the "secure pictures" instructions. I take it that's how you all post pictures?
|
|
|
|
Joined: Sep 2001
Posts: 19,152 Likes: 18
Campfire Ranger
|
OP
Campfire Ranger
Joined: Sep 2001
Posts: 19,152 Likes: 18 |
GoForBroke,
The 7.62x39 has the PA 3X Prism sight with the ACSS reticle calibrated for the 7.62x39 out to 600 yards.
Mine has been feeding flawlessly. I'm using the ASC 20 round magazines.
My odometer just rolled over to 58. No doubt the eyes start to show their age.
How many rounds do you have through the 7.62 x 39 AR now? Its an intriguing project with the inexpensive ammo prices at 18 cents a round. You just got the PSA upper and put it on a std lower correct? Yes a PSA upper. I have around 600 rounds or so through mine. Never hiccup'd. From what I learned doing some research before diving into the 7.62x39 AR-15, there are two likely problem areas one may run into. 1 - Light firing pin strikes causing failure to fire. The fix is twofold. First you need a heavy hammer strike, so milspec trigger is one way to assure that. Secondly, some x39 ammo has hard primers that are sometimes seated a tad below flush. The fix for that is an "enhanced" firing pin. The enhancement is that it is a bit longer. The PSA upper comes with the BCG/CH, and already has the enhanced firing pin in it. 2 - Magazine troubles, failure to feed. Sometimes this is nothing more than people using 223/5.56 magazines, and of course they fail if loaded with more than 4-5 rounds. The fix I read mostly was to go with ASC magazines, in particular the 20 rounders. I have a couple of the ASC-20's, they have been flawless. I did buy a couple 10-round AR-Stoner magazines from Midway, and the followers are marked ASC. I don't know if ASC makes them for AR-Stoner, but they have worked fine too. So, in a nutshell, you want an enhanced firing pin, milspec trigger, and ASC 20round mags.
|
|
|
|
Joined: Sep 2001
Posts: 19,152 Likes: 18
Campfire Ranger
|
OP
Campfire Ranger
Joined: Sep 2001
Posts: 19,152 Likes: 18 |
I just noticed the "secure pictures" instructions. I take it that's how you all post pictures?
I'm just using the Imgur default BB Code. It does start off with https.
|
|
|
|
Joined: Jan 2008
Posts: 242
Campfire Member
|
Campfire Member
Joined: Jan 2008
Posts: 242 |
I just noticed the "secure pictures" instructions. I take it that's how you all post pictures?
I'm just using the Imgur default BB Code. It does start off with https. I feel so old lol. That's all Greek to me. I'll google it lol.
|
|
|
|
Joined: Sep 2001
Posts: 19,152 Likes: 18
Campfire Ranger
|
OP
Campfire Ranger
Joined: Sep 2001
Posts: 19,152 Likes: 18 |
I can't explain it further than that either. Just the standard code from photobucket or imgur is what I use.
|
|
|
|
Joined: Sep 2001
Posts: 19,152 Likes: 18
Campfire Ranger
|
OP
Campfire Ranger
Joined: Sep 2001
Posts: 19,152 Likes: 18 |
I figured these things out by using a time-tested training method learned in the Marine Corps. It's called 'knob-dicking'.
Basically push every button to see what works and what doesn't....then try to remember which one it was that got the desired result......grin.
|
|
|
|
Joined: Jan 2008
Posts: 242
Campfire Member
|
Campfire Member
Joined: Jan 2008
Posts: 242 |
I figured these things out by using a time-tested training method learned in the Marine Corps. It's called 'knob-dicking'.
Basically push every button to see what works and what doesn't....then try to remember which one it was that got the desired result......grin. LOL, well if it ain't broke don't fix it. I guess I'll have to try that technique. Thanks, John
|
|
|
|
Joined: Sep 2001
Posts: 19,152 Likes: 18
Campfire Ranger
|
OP
Campfire Ranger
Joined: Sep 2001
Posts: 19,152 Likes: 18 |
On a different note, spring is definitely here. It's snowing this morning....
|
|
|
|
Joined: Jan 2008
Posts: 242
Campfire Member
|
Campfire Member
Joined: Jan 2008
Posts: 242 |
On a different note, spring is definitely here. It's snowing this morning.... I miss my stops in Montana. Truly God's country. My buddies in Bend had snow this week. I'm on the border of Oregon/ Idaho and we're going to have 70 degree temps this week. And the sage rat babies are just starting to show up. Crappies are starting to show up too, tough decisions to make here soon
|
|
|
|
Joined: Sep 2001
Posts: 19,152 Likes: 18
Campfire Ranger
|
OP
Campfire Ranger
Joined: Sep 2001
Posts: 19,152 Likes: 18 |
Sounds nice. Supposed hit 71 here this Friday.
|
|
|
|
Joined: Sep 2001
Posts: 19,152 Likes: 18
Campfire Ranger
|
OP
Campfire Ranger
Joined: Sep 2001
Posts: 19,152 Likes: 18 |
GoForBroke,
The 7.62x39 has the PA 3X Prism sight with the ACSS reticle calibrated for the 7.62x39 out to 600 yards.
Mine has been feeding flawlessly. I'm using the ASC 20 round magazines.
My odometer just rolled over to 58. No doubt the eyes start to show their age.
How many rounds do you have through the 7.62 x 39 AR now? Its an intriguing project with the inexpensive ammo prices at 18 cents a round. You just got the PSA upper and put it on a std lower correct? Yes a PSA upper. I have around 600 rounds or so through mine. Never hiccup'd. From what I learned doing some research before diving into the 7.62x39 AR-15, there are two likely problem areas one may run into. 1 - Light firing pin strikes causing failure to fire. The fix is twofold. First you need a heavy hammer strike, so milspec trigger is one way to assure that. Secondly, some x39 ammo has hard primers that are sometimes seated a tad below flush. The fix for that is an "enhanced" firing pin. The enhancement is that it is a bit longer. The PSA upper comes with the BCG/CH, and already has the enhanced firing pin in it. 2 - Magazine troubles, failure to feed. Sometimes this is nothing more than people using 223/5.56 magazines, and of course they fail if loaded with more than 4-5 rounds. The fix I read mostly was to go with ASC magazines, in particular the 20 rounders. I have a couple of the ASC-20's, they have been flawless. I did buy a couple 10-round AR-Stoner magazines from Midway, and the followers are marked ASC. I don't know if ASC makes them for AR-Stoner, but they have worked fine too. So, in a nutshell, you want an enhanced firing pin, milspec trigger, and ASC 20round mags. A couple other things, I'm running a H3 buffer also. It worked with the standard buffer, but I could feel it thumping the back of the extension tube pretty good. The H3 smoothed it out. Also I put the UTG Pro quad rail handguards on the upper.
|
|
|
|
Joined: Nov 2003
Posts: 18,355 Likes: 1
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2003
Posts: 18,355 Likes: 1 |
MontanaMarine good information and the price is decent on the PSA upper. I wonder how many you would get down the nitrided tube before any significant wear from the mild steel bullets would be a problem?
|
|
|
|
Joined: Sep 2001
Posts: 19,152 Likes: 18
Campfire Ranger
|
OP
Campfire Ranger
Joined: Sep 2001
Posts: 19,152 Likes: 18 |
I don't know, I'd imagine it would take many thousand. Supposedly the nitride hardens steel considerably.
|
|
|
|
Joined: Jan 2008
Posts: 242
Campfire Member
|
Campfire Member
Joined: Jan 2008
Posts: 242 |
|
|
|
|
494 members (17CalFan, 1badf350, 1234, 160user, 10Glocks, 10ring1, 39 invisible),
13,658
guests, and
941
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,195,116
Posts18,542,168
Members74,057
|
Most Online21,066 May 26th, 2024
|
|
|
|