|
|
Joined: Jul 2007
Posts: 434
Campfire Member
|
OP
Campfire Member
Joined: Jul 2007
Posts: 434 |
I am having feeding issues with one of each. The 721 in 30-06 will not pick up a round when the bolt goes forward. The 722 in 257 Roberts will pick up the round but the lead goes too high and will not chamber. You can insert the round manually and it will close and fire.
|
|
|
|
Joined: Dec 2014
Posts: 9,141 Likes: 3
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2014
Posts: 9,141 Likes: 3 |
Try to re install the magazine springs 180 deg from where they are now..before you get too far. Edit ... that first sentence is not much help....the follower springs are correctly installed when the rifle is held vertical, bbl pointing up, bolt side facing you and the follower spring forms a "W" with the smooth end engaging the follower and the scalloped end engaging the floorplate.
Last edited by flintlocke; 09/11/21.
Well this is a fine pickle we're in, should'a listened to Joe McCarthy and George Orwell I guess.
|
|
|
|
Joined: Feb 2015
Posts: 432 Likes: 1
Campfire Member
|
Campfire Member
Joined: Feb 2015
Posts: 432 Likes: 1 |
Check to see if the feed lips on the magazine box are not curled excessively. If the box is too tall for the stock inlet and the action screws are heavily torqued, they will bend. This also causes the recess in the forward surface of the magazine box to ride too high relative to the action feed ramp.
Last edited by TeeBone; 09/12/21.
|
|
|
|
Joined: Aug 2010
Posts: 48,165 Likes: 14
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,165 Likes: 14 |
I am having feeding issues with one of each. The 721 in 30-06 will not pick up a round when the bolt goes forward. The 722 in 257 Roberts will pick up the round but the lead goes too high and will not chamber. You can insert the round manually and it will close and fire. Damn, just wait till you try to extract a cartridge. You are pizzed now...
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style. You want to see an animal drop right now? Shoot him in the ear hole. BSA MAGA
|
|
|
|
Joined: Dec 2014
Posts: 9,141 Likes: 3
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2014
Posts: 9,141 Likes: 3 |
I am having feeding issues with one of each. The 721 in 30-06 will not pick up a round when the bolt goes forward. The 722 in 257 Roberts will pick up the round but the lead goes too high and will not chamber. You can insert the round manually and it will close and fire. Damn, just wait till you try to extract a cartridge. You are pizzed now... LMFAO^^^^ Serious question...why didn't they install ramrods under the barrel on the 700 series rifles to knock out the empties?
Well this is a fine pickle we're in, should'a listened to Joe McCarthy and George Orwell I guess.
|
|
|
|
Joined: May 2021
Posts: 3,511
Campfire Tracker
|
Campfire Tracker
Joined: May 2021
Posts: 3,511 |
Trying to keep the price down ?
|
|
|
|
Joined: Feb 2020
Posts: 2,407 Likes: 1
Campfire Regular
|
Campfire Regular
Joined: Feb 2020
Posts: 2,407 Likes: 1 |
Ive got a 722 that I had rebarreled to 7mm08 about 1986....Have used it extensively and it has never failed to feed or extract or eject. My Barret Fieldcraft 7mm08 has failed to extract the cartridge before.
Life (and forums) is like a box of animal crackers----There's a Jackass in every box
|
|
|
|
Joined: Sep 2010
Posts: 31,432
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Sep 2010
Posts: 31,432 |
If'n I were to start the process off by ramming my head fully up my ass, I could likely reassemble one of my 721/722s in such a way as to not feed properly.... 😁
"I can't be canceled, because, I don't give a fuuck!" --- Kid Rock 2022
Holocaust Deniers, the ultimate perverted dipchits: Bristoe, TheRealHawkeye, stophel, Ghostinthemachine, anyone else?
|
|
|
|
166 members (1eyedmule, 007FJ, 1_deuce, 2ndwind, 24HourCampFireGuy50, 24 invisible),
2,026
guests, and
1,010
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,193,082
Posts18,501,627
Members73,987
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|