Home Forums Gear Free Classifieds English walnut stock for Savage short action

Selling stock for Savage short action, top release, blind mag. Aluminum pillars. For end and barrel channel for HV controur. Tung oil seal and matt finish. Amateur job (I cut this from a blank mostly using spoke shave for Cabela's special 12fv that came with crappy plastic stock). LOP approx 13 3/8", off cast for right hand shooter. The gun shot really well. $75 shipped.

Here is the link to the photos:


https://imgur.com/a/QuXp6nf

Nice piece of wood, surely somebody needs that.

distance between screw holes?

4.5"

What action did you use?


The following measurements depict the various screw spacing on Savage 110 centerfire actions over the years. All measurements are center-to-center.

All Long Actions = 5.062" (1958 to present, staggered and center-feed magazines)
1st. Gen Short Actions = 4.522" (1959 to 1987, staggered feed magazine)
2nd Gen Short Actions = 4.275" (1998 to 2007, staggered feed magazine)
3rd Gen Short Actions = 4.400" (2005 and up, center-feed magazine, not in photo)
3rd Gen Palma/Dual-Port = 3.440" (2009 and up, single-shot only)
Axis/Edge = 4.800" (2008-present; spacing same for long or short action cartridges)