Home Forums Reloading Varmint Rifles RCBS Trim Mate accessories

I bought one of these a while back and I'm wanting to update some of the tools. What have you all used as far as brand for the individual tools? Looks like anything with an 8-32 thread will work and I was curious if certain brands are better then others. It seems that the case deburring tool that came with it, I did buy a used unit that came with a few tools, doesn't seem to do much and the inside chamfer tool seems to be a little dull.

Just an FYI, call or email RCBS with part numbers and they will 99.9% of the time ship for free.



There’s the parts list.

I really like the 3 way cutters

So do I, slick.

Funny, I don't mind trimming to length and I don't mind deburring the inside of the case mouth but I hate deburring the outside. I have cutter heads set up for 22,6mm,25, 6.5, 270, and 7mm. That way all I have to do is screw one on and I am all set, no adjusting or very little needed.

Has been mentioned the three-way cutters work really good on the trimmers. Especially the power trimmer.
OP asking about the trim make prep centers I've got one I've got the flash hole deburrs and all the different caliber stops. Primer pocket brushes. Flashole burrers .. pocket uniformers debt uniformers I should say I do not cut crimps I switch for that. Very nice handy device. That said
With a three-way cutter on the trimmer and doing wet tumbling with the stainless pins. About the only time I use the prep station anymore as with brand new brass to uniform primer pockets and deburr primer pockets and that's a one-time process with brass.