Home Forums Gear Free Classifieds Pay It Forward

1 Less Dog,

I would take that Table top priming tool and for it will give something off my bench. Please let me know if still available. Thanks, Ryan

Bushwacker, Gets the Priming tool

Thank you Garth, a quick check of the basement came up with a Cabelas Mini-Multi Tool new in the package with Pliers, LED light, Blade, screw driver, wood saw and bottle opener in a nylon case to whoever wants it.

Thanks, Ryan

Bushwacker-I'll take it on the multi-tool. PM coming, and will pay it forward in a few minutes here when I check the junk pile.

My pay it forward contribution is 100 rounds of once fired 30-06 brass from Remington and Winchester. I've got more brass I can part with if anything interesting comes up.

SORRY-brass is Remington and Federal, not Winchester. My bad.

Gopher its yours, Ryan

Bushwacker, thanks. No one has bit on my 30-06 brass yet. I can substitute 100 rounds of 300 Savage brass. Once fired Remington. Whoever responds first, be sure to let me know which brass you want-this will be an either/or offer.

Dibs on the 300 savage brass, I offer up a NIB accu-mag mossberg x-full choke for a 835

Pm sent

Wes gets the Savage brass. I'll put more brass up if I see anything I'm interested in.

I have a box of Hornady 6.5mm 140 SP, opened but looks full and a Johny Stewart Limited Edition belt buckle. Please send a PM for these if interested.

Mike

VMTHTR - I'd love the Hornady 6.5's. I'll pay it forward with a couple of items.

An Alpha Master Shooting Chrony that has been shot but I believe works OK. It doesn't come with the remote reader unit, you'll have to buy that (and it won't work without it). The impact was only at the very top rear of the unit.

A very old Pickett Deci-Log Log slide rule in the original package. Box is worn as this thing has to be 50+ years old but it's all there. Unit looks like new.

Pair of .22 rings (type that slide onto the grooves in the action).

Dang, anyone else have any Barnes XLC's, 100gr .257 or 6mm 85gr..

I have a Remington take off, 26in SS 7mm Ultra Mag bbl.. a couple scratches and low round count..

Sights are still available, and I've also found that I have a set of Leupold standard bases for a rem700. I also have some factory ammo:

1. 20 rounds (brand new box) of PMC .30-06 150g XLC's (claimed by CraigP)
2. 16 rounds of Winchester Super-X CXP2 .30-06 165g Pointed Soft Points (claimed by stanimal)
3. 9 rounds of Federal Premium 7mm Rem Mag 160g Accubonds (claimed by bearmgc)
4. 4 rounds of Federal Premium 7mm Rem Mag 140g Nosler Partitions (claimed by bearmgc)
5. 9 rounds of Hornady "Heavy Mag" 7mm Rem Mag 139g SST's (claimed by bearmgc)
6. 8 rounds of Winchester Super-X CXP3 .270win 150g Power Points (claimed by bearmgc)

I also have about 20 pieces of 1x fired Federal 7mm Rem Mag brass ... and a few Hornady Frontier 1x fired brass cases ...


I could REALLY use a 50mm sunshade for a Leupold scope ... 2.5" long or 4" long ok ... and for those not in the know, they make the shades with two different thread pitches ... the older ones (pre-2004) have a very tight thread pitch ... the newer ones have a slower pitch ... I need the newer one ... thanks!

I'll take this ammo and offer up a a leupold Rifleman 1 piece aluminum base for a Marlin 336 and a pair of Leupold Rifleman aluminum rings (verticle split) rings. Both the base and rings are new in the package.

Craig

The .30-06 PMC ammo is yours ...

CraigP-
Would love to have those 336 bases/rings to get my grandfathers Marlin up and running again.

I can throw in some over/under scope mounts for a Winchester 94, and four 2 blade broadheads - Magnus 125s.

I'll take the 7mag ammo. Thanks! Heck I'll take the .270 ammo too. PM to you. I still have the Lee 44mag dies the climbing pegs, the web belt and a magazine for SW 645 available.

They are yours. PM sent.

Craig

Dibs on BearMagic's climbing pegs. PM sent. Will put up something after hearing from Bear.