Looks like You don’t need CZ rings. That can be a good modification. Do you know what bases it’s tapped for?
Thanks!
My understanding is it was drilled and tapped for Remington 700 bases. So yes, both are an option
This used to be my rifle.
Yes, the hole spacing is for Remington 700 bases. I had work done by Dan Cowan of Renton, WA. My goal was to get a peep sight, which was possible at the time by using a base made by XS Sight Systems. It worked and the rifle shot well set up that way, but I would not do that modification again.
I also had Dan glass-bed the action, cut the barrel to 22" and crown it, free-float the barrel, and install that front sight. It balances superbly with a 4x Leupold FX-II scope and is very fast in the hands. I later used it to kill several feral cattle and a small hog on the Big Island of Hawaii. It shoots very well with S&B factory ammo and with 286-grain Nosler Partitions and 270-grain Speer semi-spitzers over 4895.
Okie John