Home Forums Gear Free Classifieds Stainless 700 .223AI

Stainless 700 action, stainless Pacnor varmint contour, 18”, 1/8 twist, threaded with stainless thread protector. Stainless TriggerTech primary trigger, Manners EH4 stock with mini chassis (accepts AICS mags), olive paint, flush cups front/rear on left, right, and bottom. One front swivel. Can leave the burris 2 piece bases on it or I may have a pic rail I can swap…will have to verify this. I purchased this second hand and don’t know the exact round count. Everything I’ve fed it from 50 to 75 gr, forming and formed, have shot nice tight groups….some of them making a single ragged hole….nothing has shot poorly. It hasn’t missed a crow yet out to 450 yards. The only “hunting” I’ve done with it is shooting crows. Great overall mini-chunk package, very fun/easy to shoot, and set up for a suppressor. Should have pics below.

Options for what you prefer:
1. In the Manners EH4 - $1550 + exact shipping
2. In a tan MDT LSS Gen 1 chassis (no tube/stock/grip, all screws included) - $1225 + exact shipping
3. Barreled action - $1050 + exact shipping
4. Add mounted SWFA 6x MOA-quad scope and Seekins low rings + $300 to any of the above

Trade interests +/- $ as needed:
G19 Gen5 MOS w/wo Holosun SCS
S&B PMII 6x42
Seekins Havak PH in 7 PRC
6.5 Grendel ammo/dies/brass
NXS 2.5-10x42 mildot/mil adjustment w/zero stop
Manners EH3 for short action 700/clone, I'm good with BDL or M5 and any barrel channel that's sporter'ish









LSS chassis:

Wow! Nice. Good seller here.

Thanks B!

I should note I originally had it in the LSS chassis and later picked up the EH4. I've not shot it in a bedded stock as both of those are essentially chassis and nether needed bedding.

The threading is 5/8 and I'll throw in a 10 round AICS if purchased with either the LSS or EH4.

Another trade item that would interest me is a stainless single shot 30-30 or 30-30AI. Contender carbine barrel (20" or greater) or one of the stainless No 1 30-30's from a few years back.

PM me if you'd be interested in selling the MDT LSS separately.

Where are you located

The NE AL/SE TN/NW GA tristate area.

The MDT LSS option is no longer available. Which leaves:

Options for what you prefer:
1. In the Manners EH4 - $1550 + exact shipping
xxxxxxxxxx
3. Barreled action - $1050 + exact shipping
4. Add mounted SWFA 6x MOA-quad scope and Seekins low rings + $300 to any of the above

Trade interests +/- $ as needed:
G19 Gen5 MOS w/wo Holosun SCS
S&B PMII 6x42
Seekins Havak PH in 7 PRC
6.5 Grendel ammo/dies/brass
NXS 2.5-10x42 mildot/mil adjustment w/zero stop
Manners EH3 for short action 700/clone, I'm good with BDL or M5 and any barrel channel that's sporter'ish
Stainless single shot 30-30 or 30-30AI

I should have listed this in the original post, the firing pin is bushed.

All pm's returned. I tried to be fair in pricing.

I ran the stock through Manner's online build. With the same configuration, it's $1,138 for the stock with 1 ten round mag. Add a stainless 700 .223 action with bushed bolt and it's well above the listed price for the package considering the stock and action alone. The barrel, chambering, installation, threading, thread protector, etc are free extra's that allow anyone to shoot until they decide they want to replace it.

For anyone wanting to add the scope/rings package to it. Consider the scope as a sale price of $200 and a very high quality pair of $100 rings.

I would also consider a stainless long action 700 clone with mag bolt face as another trade option.

Heck of a deal from a great seller.

I owned this rifle at one time. It is stupid accurate with a bunch of loads.

Kinda makes me want it back

PM sent

You don’t F *ck around when you build a rifle! If this was left-handed, I’d take a dozen!

Bump!

I'll take it at your asking price pending barrel channel measurements. Thanks again for answering all my stupid questions so politely.

pm's returned.

Rifle is SPF's to strictlyRUM. If striclyRUM passes, it goes to another member who pm'd he'd take it after strictlyRUM posted.